Burly Rear Shock Lowering Kit For Harley Dyna 2006-2017
⬇️ Low-Rider Drop: Burly Rear Lowering Kit for Harley Dyna (2006–2017)
The Burly Rear Lowering Kit (Part B28-22007 for black finish) is a specific component designed to lower the rear ride height of the Harley-Davidson Dyna models equipped with dual external shocks, spanning 2006 through 2017.
This kit is an economical and effective way to achieve a custom stance and better ground reach without replacing your stock shock absorbers entirely.
🔑 Key Features and Lowering Mechanism
Drop Amount: This specific Burly kit is designed to provide a 1-inch (1.00″) drop in rear ride height.
Note: While the full Burly Slammer Kit replaces the shocks with a 10.5-inch unit for up to 2.5 inches of drop, this “lowering block” kit is a more moderate 1-inch change.
Mechanism (Lowering Blocks): The kit consists of high-strength lowering blocks/brackets that install between the stock rear shocks and the swingarm. By effectively relocating the lower shock mounting point, the blocks reduce the bike’s resting height.
Compatibility: Designed specifically for the OEM and most aftermarket stock-length shocks on the 2006–2017 Dyna platform.
Finish: Commonly available in Black Powder-Coated steel (B28-22007) for a clean look that matches the frame.
Fitment and Exclusions
The Burly Rear Lowering Block Kit fits most 2006–2017 Twin Cam Dyna models, including:
Street Bob (FXDB)
Super Glide (FXD, FXDC)
Low Rider (FXDL)
Fat Bob (FXDF)
Wide Glide (FXDWG)
Exclusion: The kit typically excludes the Switchback (FLD) models (2012–2016) due to their unique geometry and specific shock requirements.
Installation and Important Warnings
Installation: The lowering blocks are a relatively simple bolt-on installation requiring a bike lift and basic tools to swap the mounting hardware.
DO NOT Use with Shorty Shocks: Crucial Warning: Burly specifically states this kit is not to be used in conjunction with “shorty” or “low-profile” shocks. Doing so would reduce travel too severely, leading to tire-to-fender rub and bottoming out.
Ground Clearance: Even a 1-inch drop will reduce your lean angle. Always check fender-to-belt, tire clearance, and exhaust clearance after installation.
Jiffy Stand: Check the motorcycle’s parking lean angle after installation. Your stock kickstand may need to be shortened or replaced to ensure stability.
This Burly Rear Lowering Kit is a popular and cost-effective way to achieve a 1-inch drop on your 2006–2017 Dyna while retaining your factory shock performance and adjustability.
Burly Rear Shock Lowering Kit For Harley Dyna
Looking for an inexpensive and quick install? Burly Brand Lowering Blocks is the solution for you. The Burly Lowering Blocks are time tested method to drop virtually any HD without hurting your wallet. A bike lift and a few bolts are all that is needed to pull up to an inch and a half out of the rear of most Sporties, Dynas, and FLH models.
Features:
Simple bolt on install
Includes mounting hardware
Designed for OEM and most aftermarket tock length shocks
Fender to belt and tire clearance must be checked along with frame and exhaust clearance
Made in the USA
| Product Style | AmericanV-twin Item # | Catalog Number | Store Sku | MFR. Product # | Availability |
|---|---|---|---|---|---|
| Black | 898144 | 700-421 | B28-22007 | In Stock: Ships within 24 hours |
This Product Fits
Harley Davidson
Dyna Fat Bob FXDF 2008-2017
Dyna Super Glide Custom FXDC/I 2006-2014
Dyna Super Glide FXD/I 2006, 2007, 2008, 2009, 2010
Dyna Wide Glide FXDWG/I 2006-2017
