Vance & Hines Twin Slash Round Slip-On Mufflers For Harley Freewheeler & Road Glide 3 (2017–2026)
Signature Twin Slash Styling and Deep V-Twin Acoustics Tailored for Milwaukee-Eight Trikes
Enhance the performance, custom styling, and exhaust note of your three-wheeled bagger with Vance & Hines Twin Slash Round Slip-On Mufflers. Engineered specifically for 2017 through 2026 Harley-Davidson Freewheeler (FLRT) and Road Glide 3 (FLTRT) trike platforms, these slip-on mufflers replace restrictive factory exhaust cans with world-famous 45-degree slash-cut tips and high-flow internal louvered cores.
Built with large-diameter 4-inch muffler bodies and full-coverage 220-degree heat shields, the Twin Slash slip-ons eliminate thermal bluing while delivering a rich, authoritative V-Twin rumble. Designed to match the unique chassis and bodywork clearances of Harley trikes, this system provides smoother throttle response and improved exhaust gas scavenging for your Milwaukee-Eight engine.
Technical Specifications & Product Details
| Feature / Metric | Product Specification | Rider Benefit |
|---|---|---|
| Brand / Manufacturer | Vance & Hines (Made in USA) | Industry-leading V-Twin race engineering and premium manufacturing quality |
| Muffler Body Diameter | 4.0-Inch Outer Diameter Canister | Fills out trike rear valence cutouts cleanly for a heavy-duty custom stance |
| End Treatment | Signature 45-Degree Twin Slash Cut Tip | Iconic custom styling that matches the angled lines of modern Harley baggers and trikes |
| Heat Shielding | Full-Coverage 220° Outer Heat Shields | Protects outer chrome or matte black finish against thermal discoloration and bluing |
| Finish Options | Show-Quality Chrome or Matte Black Ceramic | Coordinates effortlessly with factory engine chrome or darked-out Milwaukee-Eight trim |
Acoustic Engineering & Power Performance
### Louvered Core Baffle Design for Trike Power
Milwaukee-Eight trikes carry significantly more weight than two-wheeled touring models, placing heavier demands on the engine during acceleration. Factory exhaust mufflers trap heat and restrict airflow. Vance & Hines designed the Twin Slash system with an optimized louvered core baffle that balances backpressure, protects low-end pulling torque, and delivers a deep bass rumble without harsh highway drone.
### Key Performance Benefits
Vehicle Compatibility Guide
Vance & Hines Twin Slash Round Slip-On Mufflers offer direct, 100% bolt-on fitment on all 2017–2026 Harley-Davidson Milwaukee-Eight trike platforms using factory headers:
### Compatible Harley-Davidson Trike Models (2017–2026)
- Harley-Davidson Freewheeler: FLRT Milwaukee-Eight 107ci / 114ci (2017–2026)
- Harley-Davidson Road Glide 3: FLTRT Milwaukee-Eight 114ci (2023–2026)
Fitment Note: Designed specifically for Milwaukee-Eight trike models with factory head pipes. Will not fit older Twin Cam (2015–2016) Freewheeler models or standard two-wheeled Touring bikes without appropriate header configurations.
Step-by-Step DIY Installation Guide
Upgrading your Harley trike exhaust with Vance & Hines Twin Slash Slip-Ons takes under 45 minutes using standard shop tools.
### Required Tools
- 3/8″ Drive Ratchet with 1/2″ and 9/16″ sockets
- Torx key set (T27 / T30)
- Exhaust clamp removal tool or combination wrenches
- Penetrating lubricant
- Clean microfiber towel
### Step 1: Removal of Factory Trike Mufflers
Ensure the trike is completely cool and safely supported on a level surface. Spray penetrating oil onto the inlet joint connections. Unbolt the rear mounting screws located near the rear body work holding the stock mufflers to the frame brackets. Loosen the factory Torca clamps on the header pipe, then gently twist and slide the stock mufflers rearward until free.
### Step 2: Prepping Clamps & Slide Alignment
Slide new heavy-duty exhaust clamps over the expansion inlets of your new Vance & Hines Twin Slash mufflers. Apply a thin layer of anti-seize or lubricant to the header pipe tips to facilitate smooth positioning.
### Step 3: Mounting the Twin Slash Mufflers
Slide the Vance & Hines mufflers forward onto the header pipe outlets until fully seated against the stops. Align the rear bracket mounting points with the trike frame mounts. Hand-tighten the mounting bolts, verify that both twin slash tips align evenly with the body cutouts, and torque all hardware and clamps to factory service specifications.
Frequently Asked Questions
### Is an ECU re-tune required when installing Twin Slash slip-ons on a trike?
No. If you are installing these slip-on mufflers while keeping the stock air cleaner and factory header pipes, an ECU re-tune is not mandatory. However, pairing them with a high-flow air intake and an ECU tuner (like the Vance & Hines Fuelpak FP4) will maximize horsepower and torque gains.
### Do these mufflers clear the rear bodywork and bumper of the Freewheeler and Road Glide 3?
Yes. Vance & Hines specifically sizes and shapes the inlet length and body profile of these trike slip-ons to match the exact rear body cutouts of the FLRT Freewheeler and FLTRT Road Glide 3 chassis.
### Order Your Vance & Hines Twin Slash Trike Slip-Ons Today
Give your 2017–2026 Harley-Davidson Freewheeler or Road Glide 3 trike the deep sound, classic styling, and performance upgrade it deserves. Order your **Vance & Hines Twin Slash Round Slip-On Mufflers** today with fast shipping!
