Milwaukee Twins LED Front and Rear Turn Signal Insert Kit for Harley-Davidson Models (2000–2026)

Maximize your nighttime visibility and modernize your motorcycle’s lighting footprint with the Milwaukee Twins LED Front and Rear Turn Signal Insert Kit, engineered specifically for Harley-Davidson models spanning model years 2000 through 2026. Designed as a direct drop-in replacement for standard 2-inch bullet-style halogen turn signals, this comprehensive front-and-rear lighting conversion kit upgrades your bike with high-intensity LED technology that increases peripheral visibility, sharpens turn indication contrast, and significantly reduces electrical current draw.

Riding a motorcycle in heavy traffic or on unlit rural backroads requires immediate, high-contrast visual presence to command the attention of surrounding motorists. Factory incandescent turn signal bulbs are slow to illuminate, cast a dull yellow glow, and are prone to premature filament failure from engine vibration. The Milwaukee Twins LED conversion package resolves these safety concerns completely by utilizing high-output SMD LED arrays that illuminate instantly, projecting brilliant daylight-white, high-visibility red, and vivid amber lighting signatures across all 360 degrees of surrounding space.

Why Choose the Milwaukee Twins LED Front & Rear Turn Signal Insert Kit?

Engineered for high-mileage touring riders, daily commuters, and custom V-Twin builders, the Milwaukee Twins LED Insert Kit combines sleek visual style, rugged build quality, and extreme reliability. Constructed on solid-state circuit boards with integrated aluminum heat dissipation plates and high-impact optical lenses, these inserts withstand continuous motor vibration, high-velocity wind buffeting, and extreme weather exposure with ease.

1. Dynamic Front White-to-Amber Switchback Technology

The front inserts in the Milwaukee Twins LED Kit feature advanced dual-color switchback logic. Under standard riding conditions, the outer cluster projects a bright, 6000K daylight-white running light halo that broadens your motorcycle’s front visual profile to oncoming drivers. When you activate your turn signal, the white light instantly shuts off while a high-candlepower amber inner core flashes brightly, returning to white running mode once the turn is cancelled.

2. High-Visibility Rear Run-Brake-Turn Performance

The rear LED inserts utilize high-density red LED clusters that operate as low-intensity running lights, flaring into a high-intensity full-flood light state when braking or signaling turns. This rapid signal transition ensures drivers behind you react faster during sudden deceleration, significantly lowering your risk of rear-end collisions.

3. Effortless 5-Minute Plug-and-Play Installation

Upgrading your Harley’s turn signals doesn’t require wire cutting, soldering, or complex relay wiring. Each Milwaukee Twins insert is built on a standard dual-contact or single-contact base. Simply pop off your stock plastic turn signal lenses, twist out the old halogen bulb, insert the LED board into the socket, and snap your lenses back on. Upgrading your full front-and-rear lighting array takes less than 15 minutes in your garage.

Milwaukee Twins LED Inserts vs. Stock OEM Incandescent Bulbs

Replacing your factory halogen turn signal bulbs with the Milwaukee Twins LED insert kit yields massive performance upgrades across brightness, response speed, and operational longevity:

Comprehensive Vehicle Fitment Guide (2000–2026)

The Milwaukee Twins LED Front & Rear Turn Signal Insert Kit is engineered to fit standard 2-inch bullet-style turn signal housings across Harley-Davidson families from 2000 through 2026.

Guaranteed Fitment Applications:

• Harley-Davidson Street Glide (FLHX / FLHXS / FLHXST): 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
• Harley-Davidson Road Glide (FLTRX / FLTRXS / FLTRK): 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
• Harley-Davidson Road King (FLHR / FLHRXS): 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
• Harley-Davidson Softail Models (Heritage, Fat Boy, Slim, Breakout, Street Bob): 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
• Harley-Davidson Dyna Models (Super Glide, Wide Glide, Street Bob, Low Rider): 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
• Harley-Davidson Sportster Models (Iron 883, Forty-Eight, 1200): 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022

(Note: Fits standard 2-inch pop-off bullet-style signal housings. Does not fit older flat pancake-style lenses or models with sealed non-removable LED housings.)

Step-by-Step Installation Overview

Installing your Milwaukee Twins LED Front and Rear Turn Signal Inserts is a simple tool-free process that takes less than 15 minutes.

Required Tools:

• Flat-blade screwdriver or non-marring trim wedge (to pop off signal lenses)
• Clean microfiber cloth

Installation Breakdown:

Step 1: Turn Signal Lens Removal

1. Turn off the motorcycle ignition switch for safety.
2. Locate the small pry notch on the edge of the plastic bullet turn signal lens housing.
3. Insert a flat-blade tool or trim wedge into the notch and gently twist to un-snap the lens cover.

Step 2: OEM Incandescent Bulb Removal

1. Push inward slightly on the factory glass bulb, twist counterclockwise, and pull it straight out of the socket.
2. Inspect the socket contact points for corrosion or debris and wipe clean if necessary.

Step 3: Insert Milwaukee Twins LED Boards

1. Align the pin tabs on the metal base of the Milwaukee Twins LED insert board with the socket slots.
2. Push the insert into the socket and twist clockwise until securely locked in place.
3. Coil the small wire lead behind the circuit board neatly inside the bullet housing housing body.

Step 4: Operational Check & Lens Reinstallation

1. Turn on the ignition to check front white running lights, amber turn flashers, and rear red brake/turn functions.
2. Align the lens cap over the bullet housing bucket and snap it firmly back into place.

Frequently Asked Questions (FAQs)

Q: Will I need a load equalizer to prevent hyper-flashing on my Harley?

A: On 2011-newer Softail/Dyna and 2014-newer Touring models equipped with HD CAN-bus / BCM electrical systems, no load equalizer is required (the BCM automatically recalibrates). Models from 2000–2010/2013 may require an inline LED Load Equalizer to maintain standard flash timing.

Q: Can I use my stock clear or amber lenses with these LED inserts?

A: Yes! Front switchback inserts can be used with clear or smoked lenses to allow the white and amber colors to shine through accurately. Rear red inserts work best with clear, smoked, or red lenses.

Q: Are the Milwaukee Twins LED Turn Signals street legal?

A: Yes! The LED inserts meet DOT and SAE guidelines for vehicular turn signal illumination and color compliance across all 50 states.

Q: Are these turn signal inserts waterproof?

A: Yes. The circuit boards feature a weather-resistant conformal coating designed to withstand rain, car washes, and ambient moisture inside the signal housing.

Final Verdict: The Simplest, Highest-Value LED Lighting Upgrade for Harleys

If you want to drastically boost your motorcycle’s visual presence, improve signal reaction times, and eliminate burnt-out bulbs forever, the Milwaukee Twins LED Front and Rear Turn Signal Insert Kit is the single best value upgrade for your 2000–2026 Harley-Davidson. Drive safer and ride with maximum confidence day or night.

Upgrade your motorcycle’s lighting setup today. Order your Milwaukee Twins LED Turn Signal Insert Kit now!

Custom Dynamics Shark Demon LED Front Turn Signals for Harley-Davidson Road Glide Models (2015–2026)

Sharpen your modern bagger’s front profile with superior forward visibility and streamlined fairing aesthetics using the Custom Dynamics Shark Demon LED Turn Signals, engineered specifically for Harley-Davidson Road Glide models spanning 2015 through 2026. Designed to seamlessly fit the iconic shark-nose fairing geometry of late-model Road Glides, these ultra-bright LED indicator assemblies replace bulky factory turn signals with low-profile, high-intensity modules that dramatically improve contrast and reaction times for surrounding traffic.

Riding a heavy-duty Road Glide at high speeds demands distinct signal visibility and uncompromised frontal style. OEM factory turn signals can look clunky and outdated against the sleek contours of the shark-nose fairing. The Custom Dynamics Shark Demon system addresses both aesthetics and safety by integrating high-power white running lights that automatically switch off to reveal vivid amber turn indication when activated, providing instantaneous visual cues to oncoming motorists.

Why Upgrade to Custom Dynamics Shark Demon LED Turn Signals?

Engineered exclusively to match the aggressive bodywork of 2015–2026 Road Glide models (FLTRX / FLTRXS / FLTRU / FLTRK / FLTRXST), the Shark Demon LED Turn Signal Kit delivers a high-end custom aesthetic without compromising on rugged reliability. Constructed with heavy-duty die-cast aluminum housings, UV-stabilized polycarbonate lenses, and solid-state LED architecture, these signal pods handle high-velocity road debris, heavy downpours, and engine vibration effortlessly.

1. Dynamic White-to-Amber Switchback Performance

The Shark Demon LED Turn Signals feature advanced switchback technology. During normal operation, the modules project a continuous, high-intensity daylight-white running light profile that expands your motorcycle’s visual footprint to oncoming traffic. When turn signaling is engaged, the white light cuts out completely to flash a sharp, high-contrast amber sequence, making your turning intentions unmistakable.

2. Streamlined Shark-Nose Fairing Integration

Ditch the outdated lollipop-style factory blinkers for a tight, aggressive stance. The Shark Demon turn signals hug the contours of the Road Glide outer fairing, reducing drag and creating a clean, seamless look that elevates your motorcycle’s custom build quality whether parked or rolling down the highway.

3. Zero-Modification Plug-and-Play Wiring

Upgrading your turn signals should not involve splicing or altering your motorcycle’s delicate electrical harness. Custom Dynamics ships this kit with vehicle-specific wiring adapters that click directly into your factory Harley-Davidson lighting connectors. The system mounts securely using factory attachment points in under 30 minutes.

Custom Dynamics Shark Demon Signals vs. Factory OEM Lighting

Upgrading your 2015–2026 Harley-Davidson Road Glide to Custom Dynamics Shark Demon LED Turn Signals provides immediate benefits in lighting intensity, styling, and electrical reliability:

Comprehensive Vehicle Fitment Guide (2015–2026)

The Custom Dynamics Shark Demon LED Turn Signal assembly is precision-engineered to integrate with the fairing mounting locations across modern shark-nose Road Glide models.

Guaranteed Fitment Applications:

• Harley-Davidson Road Glide Standard / Special (FLTRX / FLTRXS): 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
• Harley-Davidson Road Glide Ultra / Limited (FLTRU / FLTRK): 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
• Harley-Davidson Road Glide ST (FLTRXST): 2022, 2023, 2024, 2025, 2026
• Harley-Davidson CVO Road Glide (FLTRXSE): 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

Step-by-Step Installation Overview

Installing your Custom Dynamics Shark Demon LED Turn Signals is a straightforward garage project requiring basic hand tools.

Required Tools:

• Torx drivers (T25, T27)
• 3/8″ Ratchet and socket set
• Non-marring trim removal tool
• Blue threadlocker (Loctite 242)
• Microfiber towel (to protect painted surfaces)

Installation Breakdown:

Step 1: Outer Fairing Access

1. Park the motorcycle on a level surface, turn off the ignition, and pull the main system fuse for safety.
2. Remove the windshield mounting screws and carefully set the windshield aside on a soft cloth.
3. Unbolt the outer fairing Torx fasteners along the inner fairing speaker housing perimeter and lower fairing mounts.

Step 2: Disconnect OEM Turn Signals

1. Ease the outer fairing forward to access the internal turn signal wiring plugs.
2. Disconnect the factory signal harness connectors and unbolt the stock turn signal mounting hardware.

Step 3: Mount Shark Demon Signals & Connect Harness

1. Align the Shark Demon LED signal housings against the fairing mounting channels, securing them with the provided hardware and blue threadlocker.
2. Plug the included plug-and-play wiring adapters directly into your Harley’s factory turn signal sockets.
3. Ensure wire routing is tidy and free from pinch points along the fairing subframe.

Step 4: Operational Check & Reassembly

1. Re-insert the main battery fuse and turn on the ignition to check running light and turn signal functions.
2. Verify that the switchback feature cuts off the white light smoothly when the amber blinker is triggered.
3. Reinstall the outer fairing and windshield, torquing fasteners evenly to spec.

Frequently Asked Questions (FAQs)

Q: Will these turn signals cause hyper-flashing on 2015–2026 Harley CAN-bus electrical systems?

A: No. The Shark Demon LED Turn Signals feature built-in solid-state load compensation designed specifically for modern Harley CAN-bus systems, ensuring normal flash rates without dash warning lights.

Q: Are the Custom Dynamics Shark Demon Turn Signals street legal?

A: Yes! The Shark Demon signals meet or exceed all DOT and SAE standards for 50-state legal motor vehicle turn signal identification.

Q: What inner housing finish options are available?

A: Custom Dynamics offers the Shark Demon signals in durable gloss black or chrome anodized finishes to match your bike’s trim package perfectly.

Q: What warranty coverage comes with these LED turn signals?

A: Custom Dynamics backs these LED turn signal modules with their comprehensive Lifetime LED Warranty against LED failure.

Final Verdict: Sleek, High-Output Signal Style for Road Glides

If you want to sharpen your front-end styling while enhancing daylight and night visibility, the Custom Dynamics Shark Demon LED Turn Signal Kit is the ultimate upgrade for your 2015–2026 Harley-Davidson Road Glide. Streamline your fairing and ride with maximum confidence.

Upgrade your Road Glide today. Order your Custom Dynamics Shark Demon LED Turn Signals now!

Custom Dynamics Shark Demon LED Front Turn Signals for Harley-Davidson FLTRX Road Glide (2023–2026)

Transform your modern bagger’s front profile with maximum forward visibility and streamlined fairing aesthetics using the Custom Dynamics Shark Demon LED Turn Signals, engineered specifically for Harley-Davidson FLTRX Road Glide models spanning 2023 through 2026. Designed to complement the redesigned fairing geometry of late-model Road Glides, these ultra-bright LED indicator assemblies replace bulky factory turn signals with low-profile, high-intensity modules that dramatically improve contrast and reaction times for surrounding traffic.

Riding a modern Road Glide at high speeds requires distinct signal visibility and uncompromised frontal style. OEM factory turn signals can look clunky against the razor-sharp contours of the updated FLTRX fairing. The Custom Dynamics Shark Demon system addresses both aesthetics and safety by integrating high-power white running lights that automatically switch off to reveal vivid amber turn indication when activated, providing instantaneous visual cues to oncoming motorists.

Why Upgrade to Custom Dynamics Shark Demon LED Turn Signals?

Engineered exclusively to match the aggressive bodywork of the 2023–2026 FLTRX Road Glide, the Shark Demon LED Turn Signal Kit delivers a high-end custom aesthetic without compromising on rugged reliability. Constructed with heavy-duty aluminum housings, UV-stabilized polycarbonate lenses, and solid-state LED architecture, these signal pods handle high-velocity road debris, heavy downpours, and engine vibration effortlessly.

1. Dynamic White-to-Amber Switchback Performance

The Shark Demon LED Turn Signals feature advanced switchback technology. During normal operation, the modules project a continuous, high-intensity daylight-white running light profile that expands your motorcycle’s visual footprint to oncoming traffic. When turn signaling is engaged, the white light cuts out completely to flash a sharp, high-contrast amber sequence, making your turning intentions unmistakable.

2. Streamlined Fairing Integration

Ditch the outdated lollipop-style factory blinkers for a tight, aggressive stance. The Shark Demon turn signals hug the contours of the FLTRX Road Glide outer fairing, reducing drag and creating a clean, seamless look that elevates your motorcycle’s custom build quality.

3. Zero-Modification Plug-and-Play Wiring

Upgrading your turn signals should not involve splicing or altering your motorcycle’s delicate electrical harness. Custom Dynamics ships this kit with vehicle-specific wiring adapters that click directly into your factory Harley-Davidson lighting connectors. The system mounts securely using factory attachment points in under 30 minutes.

Custom Dynamics Shark Demon Signals vs. Factory OEM Lighting

Upgrading your 2023–2026 Harley-Davidson Road Glide to Custom Dynamics Shark Demon LED Turn Signals provides immediate benefits in lighting intensity, styling, and electrical reliability:

Comprehensive Vehicle Fitment Guide (2023–2026)

The Custom Dynamics Shark Demon LED Turn Signal assembly is precision-engineered to integrate with the fairing mounting locations on modern FLTRX Road Glide models.

Guaranteed Fitment Applications:

• Harley-Davidson Road Glide Standard / Custom (FLTRX): 2023, 2024, 2025, 2026
• Harley-Davidson Road Glide ST (FLTRXST): 2023, 2024, 2025, 2026
• Harley-Davidson CVO Road Glide (FLTRXSE): 2023, 2024, 2025, 2026

Step-by-Step Installation Overview

Installing your Custom Dynamics Shark Demon LED Turn Signals is a straightforward garage project requiring basic hand tools.

Required Tools:

• Torx drivers (T25, T27)
• 3/8″ Ratchet and socket set
• Non-marring trim removal tool
• Blue threadlocker (Loctite 242)
• Microfiber towel (to protect painted surfaces)

Installation Breakdown:

Step 1: Outer Fairing Access

1. Park the motorcycle on a level surface, turn off the ignition, and pull the main system fuse for safety.
2. Remove the windshield mounting screws and carefully set the windshield aside on a soft cloth.
3. Unbolt the outer fairing Torx fasteners along the inner fairing speaker housing perimeter.

Step 2: Disconnect OEM Turn Signals

1. Ease the outer fairing forward to access the internal turn signal wiring plugs.
2. Disconnect the factory signal harness connectors and unbolt the stock turn signal mounting hardware.

Step 3: Mount Shark Demon Signals & Connect Harness

1. Align the Shark Demon LED signal housings against the fairing mounting channels, securing them with the provided hardware and blue threadlocker.
2. Plug the included plug-and-play wiring adapters directly into your Harley’s factory turn signal sockets.
3. Ensure wire routing is tidy and free from pinch points along the fairing subframe.

Step 4: Operational Check & Reassembly

1. Re-insert the main battery fuse and turn on the ignition to check running light and turn signal functions.
2. Verify that the switchback feature cuts off the white light smoothly when the amber blinker is triggered.
3. Reinstall the outer fairing and windshield, torquing fasteners evenly to spec.

Frequently Asked Questions (FAQs)

Q: Will these turn signals cause hyper-flashing on 2023–2026 Harley CAN-bus electrical systems?

A: No. The Shark Demon LED Turn Signals feature built-in solid-state load compensation designed specifically for late-model Harley CAN-bus systems, ensuring normal flash rates without dash warning lights.

Q: Are the Custom Dynamics Shark Demon Turn Signals street legal?

A: Yes! The Shark Demon signals meet or exceed all DOT and SAE standards for 50-state legal motor vehicle turn signal identification.

Q: What inner housing finish options are available?

A: Custom Dynamics offers the Shark Demon signals in durable gloss black or chrome anodized finishes to match your bike’s trim package perfectly.

Q: What warranty coverage comes with these LED turn signals?

A: Custom Dynamics backs these LED turn signal modules with their comprehensive Lifetime LED Warranty against LED failure.

Final Verdict: Sleek, High-Output Signal Style for Road Glides

If you want to sharpen your front-end styling while enhancing daylight and night visibility, the Custom Dynamics Shark Demon LED Turn Signal Kit is the ultimate upgrade for your 2023–2026 Harley-Davidson FLTRX Road Glide. Streamline your fairing and ride with maximum confidence.

Upgrade your Road Glide today. Order your Custom Dynamics Shark Demon LED Turn Signals now!

This Product Fits

Harley Davidson
Softail Fat Boy FLSTF/I 1990-2017
Softail Fat Boy Lo FLSTFB 2010-2016
Softail Fat Boy S FLSTFBS 2016, 2017

This is a universal fit part; it may or may not fit without modification

Clean Rear Profile: Biker’s Choice Bullet-Style Turn Signal Bar for Harley (1999–2017)

The Biker’s Choice Bullet-Style Turn Signal Bar is a popular and straightforward upgrade designed to replace the wide, often bulky, stock rear turn signal bar on many Harley-Davidson Touring (FLH/FLT) and Softail (FLST) models across the 1999 through 2017 model years.

This kit features a narrower-profile mounting bar and sleek bullet-style turn signals, resulting in a custom, streamlined look by tucking the signals closer to the fender and between the saddlebags. It is an excellent choice for riders looking to clean up the rear end, especially those adding aftermarket saddlebags.
Key Features and Components

This turn signal bar provides a visual upgrade and functional replacement for the factory rear lighting.

Narrow Profile Bar: The custom bar design is narrower than the OEM bar, which pulls the turn signals inboard. This is crucial for clearance, especially when fitting aftermarket hard saddlebags (like those on a Heritage Classic or Electra Glide).

Bullet-Style Signals: The kit includes the classic Bullet-Style signal housings, providing a cleaner, more modern look than older, larger factory signals.

Complete Kit: Typically includes the custom mounting bar, two bullet-style turn signal housings, wiring, and incandescent bulbs.

Lens Options: Available with either amber (DOT-approved) or smoke lenses, allowing for a choice between classic visibility and a custom, stealth appearance.

Finish Options: Generally available in Chrome or Black finish to match your bike’s aesthetic.

Fitment and Installation

The kit is known for its wide application across the Twin Cam era of Harleys and its simple installation.

Wide Twin Cam Fitment: Designed to fit many Softail FLST/FLSTC models (e.g., Heritage Classic, Deluxe) and Touring FLH/FLT models (e.g., Road King, Electra Glide) from 1999–2017. (Note: Specific exclusions and requirements may apply, particularly with certain CVO models or the post-2009 Touring platform. Always check the specific part number for your model year).

Plug-and-Play: The entire assembly is designed for a direct, plug-and-play bolt-on installation, making it a simple upgrade that uses the factory mounting points and wiring connector.

Lighting Type: The base kits typically include incandescent bulbs. Riders who wish to upgrade to brighter LED bulbs will need to purchase the LEDs and an LED load equalizer separately to ensure the turn signals flash at the correct rate.

The Biker’s Choice Bullet-Style Turn Signal Bar is a reliable, custom-styled choice for riders seeking a Harley Narrow Rear Turn Signal Bar to clean up their bike’s rear end and ensure better clearance for saddlebags.
Biker’s Choice Bullet-Style Turn Signal Bar For Harley
Features:

Tucks turn signals in tighter for a custom look.
Amber lenses with corresponding bulbs.
Lenses are DOT approved

This Product Fits

Harley Davidson
Electra Glide Classic FLHTC/I 1999-2013
Electra Glide CVO/SE FLHTCSE 2004
Electra Glide CVO/SE FLHTCSE2 2005
Electra Glide Standard FLHT/I 1999-2008
Electra Glide Ultra Classic FLHTCU/I 1999-2013
Electra Glide Ultra Limited FLHTK 2010, 2011, 2012, 2013
Road Glide FLTR/I 1999-2008
Road King Classic FLHRC/I 1999-2013
Road King Custom FLHRS/I 2004, 2005, 2006, 2007
Road King CVO/SE FLHRSE3 2007
Road King CVO/SE FLHRSE4 2008
Road King CVO/SE FLHRSE5 2013
Road King CVO/SE FLHRSEI 2002
Road King CVO/SE FLHRSEI2 2003
Road King FLHR/I 1999-2008
Softail Heritage Classic FLSTC/I 1999-2017
Softail Springer Classic FLSTSC/I 2005, 2006, 2007
Street Glide CVO/SE FLHXSE 2010
Street Glide CVO/SE FLHXSE2 2011
Street Glide CVO/SE FLHXSE3 2012
Ultra Classic Electra Glide CVO/SE FLHTCUSE 2006
Ultra Classic Electra Glide CVO/SE FLHTCUSE2 2007
Ultra Classic Electra Glide CVO/SE FLHTCUSE3 2008
Ultra Classic Electra Glide CVO/SE FLHTCUSE4 2009
Ultra Classic Electra Glide CVO/SE FLHTCUSE5 2010
Ultra Classic Electra Glide CVO/SE FLHTCUSE6 2011
Ultra Classic Electra Glide CVO/SE FLHTCUSE7 2012
Ultra Classic Electra Glide CVO/SE FLHTCUSE8 2013

Stealth Safety: Alloy Art Fender Strut LED Marker Lights for Harley Dyna (1991–2005)

The Alloy Art Fender Strut LED Marker Lights are the ultimate minimalist lighting solution designed to provide crucial rear-end visibility while radically cleaning up the fender area of the classic Harley-Davidson Dyna platform from 1991 through 2005. These high-quality, ultra-thin LED light strips are engineered to mount seamlessly and discreetly onto the rear fender struts, eliminating the need for bulky stock turn signals and delivering bright, effective illumination.
Minimalist Design, Maximum Impact

Alloy Art specializes in high-quality, custom components that prioritize clean lines and flawless integration, perfectly embodied by these strut lights.

Ultra-Thin Profile: The lights are encased in a sleek, low-profile housing that mounts directly to the fender struts, becoming virtually invisible when not illuminated. This achieves a highly sought-after Dyna Fender Eliminator Lights look.

Brilliant LED Illumination: Utilizing powerful, closely-spaced LEDs, these strips provide high-intensity light (typically red/amber) that is visible from the rear and side, drastically improving safety compared to stock rear indicators.

Integrated Functionality: The lights are often designed to function as running lights and turn signals, or sometimes full Run/Brake/Turn signals (depending on the specific model variation and wiring module used), offering versatile and effective signaling.

Precision Fitment for Classic Dyna

These lights are specifically engineered for a direct, custom fit on the earlier Dyna chassis.

Direct Strut Mounting: Designed to attach directly to the rear Dyna Fender Strut without drilling or modification in most cases, ensuring a clean and secure installation.

Classic Dyna Compatibility: Perfect fitment for the Harley Dyna Rear LED Marker Lights 1991-2005 range, covering the popular FXR-based Dynas and early Twin Cam FXD models (like the Super Glide, Low Rider, and Wide Glide).

High-Quality Finish: CNC-machined components (often aluminum) are finished in durable chrome or black, ensuring the lights stand up to the elements and maintain their custom appearance.

The Alloy Art Fender Strut LED Marker Lights are the definitive upgrade for riders seeking Alloy Art Stealth Lighting Dyna that enhances both the clean, aggressive lines and the safety of their classic Dyna motorcycle.

Alloy Art Fender Strut LED Marker Lights For Harley Dyna
Features:

Feature a 70° visual range and are about 60% brighter than most LEDs on the market
Use existing mounting hardware

Made in the USA

This Product Fits

Harley Davidson
Dyna Convertible FXDS 1994-2000
Dyna Glide Custom FXDC 1992
Dyna Glide Daytona FXDB-D 1992
Dyna Glide Sturgis FXDB-S 1991
Dyna Low Rider FXDL/I 1993-2005
Dyna Super Glide Custom FXDC/I 2005
Dyna Super Glide FXD/I 1995-2005
Dyna Super Glide Sport FXDX 1999-2005
Dyna Super Glide Sport Touring FXDXT 2001, 2002, 2003
Dyna Wide Glide FXDWG/I 1993-2005

Custom Rear Style: Kuryakyn Bullet Rear Turn Signal Bar Kit for Harley (1986–2022)

The Kuryakyn Bullet Rear Turn Signal Bar Kit is a highly effective, direct-replacement upgrade designed to replace the large, often dated, stock rear turn signal bar and signals on a massive range of Harley-Davidson models from 1986 through 2022. This kit utilizes the sleek “Bullet-Style” signals paired with a contoured, custom bar to clean up the rear fender area while maintaining high-visibility signaling.
Aesthetic Improvement and Visibility

This kit provides a significant visual improvement over the stock setup while often enhancing light effectiveness.

Sleek Custom Bar: The included rear turn signal bar features a custom, often contoured design (available in chrome or black) that is less bulky and more visually appealing than the wide, straight stock bar. This immediately cleans up the rear fender area.

Bullet Style Signals: The bar is equipped with the popular Bullet-Style housings, providing a modern, classic custom look. Kuryakyn often includes lenses (red or smoked) and high-quality incandescent bulbs or integrated LEDs (depending on the specific kit variation) for superior light output.

Triple Functionality (Optional): Many Kuryakyn kits are designed to convert the rear turn signals into Run-Brake-Turn lights by utilizing a specialized module (sometimes included, sometimes sold separately), maximizing the visibility and safety functions of the rear signals.

Broad Fitment and Installation

The Kuryakyn Bullet Rear Turn Signal Bar is engineered for wide application across the Harley Big Twin lineup.

Wide Range Compatibility: This kit is designed to replace the standard rear turn signal bar on a huge variety of models, including Harley Dyna, Softail, and many Touring models (FLH/FLT) spanning the 1986 to 2022 model years.

Direct Bolt-On: The bar is designed for direct bolt-on installation to the stock fender mounting holes, making the upgrade straightforward for the home mechanic.

Quality Construction: Built with durable, high-quality materials to ensure long-lasting performance and resistance to weathering.

Choosing the Kuryakyn Bullet Rear Turn Signal Bar Kit is a simple yet effective way to achieve a clean, Harley Custom Turn Signal Bar 1986-2022 look while upgrading the quality and visibility of your motorcycle’s rear lighting.
Kuryakyn Bullet Rear Turn Signal Bar Kit For Harley

Clean up your ride by replacing the large, unsightly stock rear turn signals with this Bullet Rear Turn Signal Bar from Kuryakyn! These streamlined bullet shaped turn signals have a classic and clean style that is neatly tied together with a license plate relocation plate. The license plate is relocated just below the taillight and illuminated by a built-in light.
Features:

Replaces the OEM turn signal bar and signals
Flat license plate support included
Single circuit with deep-dish bezels and red lenses

Note: Can be used with the Kuryakyn Curved License Plate Frame, sold separately.

This Product Fits

Harley Davidson
Electra Glide Classic FLHTC/I 1991-2013
Electra Glide Sport FLHS 1991, 1992, 1993
Electra Glide Standard FLHT/I 1991-2009
Electra Glide Ultra Classic FLHTCU/I 1991-2013
Electra Glide Ultra Limited FLHTK 2010, 2011, 2012, 2013
Road Glide FLTR/I 1998-2008
Road King Classic FLHRC/I 1998-2013
Road King Custom FLHRS/I 2004, 2005, 2006, 2007
Road King FLHR/I 1994-2022
Road King Special FLHRXS 2021, 2022, 2023, 2024, 2025
Softail Deluxe FLSTN/I 2005-2017
Softail Heritage Classic FLSTC/I 1987-2017
Softail Heritage FLST/I 1986-2006
Softail Nostalgia FLSTN/I 1993
Softail Special FLSTN/I 1994, 1995, 1996
Tour Glide Classic FLTC/I 1991
Tour Glide Ultra Classic FLTCU/I 1991-1996

Invisible Illumination: Kodlin USA 3-in-1 Neowise Fender Strut Rear Indicators for Harley Softail (2018–2026)

The Kodlin USA 3-in-1 Neowise Fender Strut Rear Indicators represent the pinnacle of minimalist, integrated rear lighting technology for the modern Harley-Davidson Softail (M8) platform, covering models from 2018 through 2026. Designed to replace the bulky factory rear signals entirely, these ultra-thin, almost invisible LED strips mount directly to the fender struts, providing brilliant Run, Brake, and Turn functionality in one sleek unit while radically cleaning up the rear fender.
Neowise Technology: Maximum Output, Minimalist Design

Kodlin USA is renowned for German engineering and minimalist styling, and the Neowise line exemplifies this focus on clean integration.

3-in-1 Functionality: Each ultra-thin strip serves three vital functions, eliminating the need for separate turn signals, brake lights, and running lights:

Running Light: Constant red illumination.

Brake Light: High-intensity red flash for instant stopping warning.

Turn Signal: Bright amber flash for directional indication.

Invisible Integration: The low-profile design of these Harley Softail LED Fender Strut Lights 2018-2026 mounts flush and discretely beneath the fender struts, providing a factory-quality, custom look. When turned off, they are virtually invisible, achieving a highly sought-after Softail Fender Eliminator Indicators aesthetic.

Brilliant LED Output: Utilizing high-powered LEDs, the Kodlin Neowise 3-in-1 Indicators deliver phenomenal light intensity, ensuring maximum visibility and safety despite their compact size.

M8 Softail Specific Installation

These indicators are precisely engineered for the specific frame and wiring architecture of the Milwaukee-Eight Softail models.

Model-Specific Fitment: Designed as a direct bolt-on replacement for the OEM rear indicators on the 2018-later Softail models, including Street Bob, Low Rider, Fat Bob, Slim, and Heritage Classic.

Plug-and-Play Wiring: The units are typically designed to connect directly into the M8 Softail’s wiring harness with minimal fuss, ensuring a straightforward Plug-and-Play installation for the Integrated Run Brake Turn Softail system.

DOT/SAE Compliant: Despite the custom design, these indicators are designed to meet regulatory standards for legal and safe operation.

The Kodlin USA 3-in-1 Neowise Fender Strut Rear Indicators are the ultimate upgrade for any 2018-2026 Softail owner who desires a clean, high-performance, and technologically advanced rear lighting solution.
Kodlin USA 3 in 1 Neowise Fender Strut Rear Indicators For Harley Softail

These amazingly small triple function, run / brake / turn indicators nearly disappear when powered off, but pack a punch when you need them!
Features:

Amazingly small and super bright 3-1 run / brake / turn rear indicators
Engineered in Germany with SMD-LED technology
11 MM / 0.4″ diameter lens
Bolts directly to fender strut
Can be modified to fit older HD models
Sold in pairs

This Product Fits

Harley Davidson
Softail Breakout 114 FXBRS 2018, 2019, 2020
Softail Breakout 117 FXBR 2023, 2024, 2025, 2026
Softail Breakout FXBR 2018, 2019
Softail Deluxe FLDE 2018, 2019, 2020
Softail Fat Bob 114 FXFBS 2018-2023
Softail Fat Bob FXFB 2018, 2019
Softail Fat Boy 114 FLFBS 2018-2024
Softail Fat Boy FLFB 2018, 2019, 2025, 2026
Softail FXDR 114 FXDRS 2019, 2020
Softail Heritage Classic 114 FLHCS 2018-2024
Softail Heritage Classic FLHC 2018-2026
Softail Low Rider FXLR 2018, 2019, 2020
Softail Low Rider S FXLRS 2020-2026
Softail Low Rider ST FXLRST 2022, 2023, 2024, 2025, 2026
Softail Slim FLSL 2018, 2019, 2020, 2021
Softail Sport Glide FLSB 2018, 2019, 2020, 2021
Softail Standard FXST 2020, 2021, 2022, 2023, 2024
Softail Street Bob 114 FXBBS 2021, 2022, 2023, 2024
Softail Street Bob FXBB 2018, 2019, 2020, 2025, 2026

Sleek Visibility: Kuryakyn LED Torpedo Turn Signal Indicator Lights (Universal Harley Fitment)

The Kuryakyn LED Torpedo Turn Signal Indicator Lights are a premium, highly stylized upgrade designed to replace bulky stock indicators with a sleek, aerodynamic look and high-intensity LED performance. These indicators are popular for their minimalist, Torpedo shape and their versatile application across a wide range of Harley-Davidson models, giving any bike a clean, custom, and highly visible signaling solution.
Aero Design and High-Intensity LEDs

Kuryakyn is known for blending custom aesthetics with effective performance, making the Torpedo Turn Signal a standout accessory.

Aerodynamic Torpedo Shape: The signature Torpedo Style LED Turn Signals housing provides a clean, fast look that contrasts sharply with the large, often clunky, factory signals. This shape instantly enhances the custom profile of the motorcycle.

High-Intensity LED Output: Equipped with bright, clustered LEDs (typically amber), these signals provide superior light output and intensity compared to standard incandescent bulbs. The LED Turn Indicator Lights ensure maximum visibility, which is a critical safety upgrade.

Faster Response Time: LEDs illuminate instantly, providing quicker warning to other drivers compared to traditional bulbs, giving them extra reaction time.

Versatile Fitment and Easy Installation

While specific mounting locations may require different adapters, the overall design of the Kuryakyn LED Torpedo Turn Signals is made for broad applicability across the Harley lineup.

Universal Custom Fitment: Designed to replace most stock indicators (front or rear) on Harley-Davidson models equipped with standard 1/4″-20 mounting studs. They can be mounted to handlebar controls, forks, or rear fender struts, making them a popular choice for Universal Harley Custom Signals.

Durable Construction: Built with rugged, die-cast aluminum housings (often available in chrome or satin black) and durable lenses, ensuring they can withstand road vibration and the elements.

Easy Wiring: The signals are typically designed for straightforward connection into the stock wiring harness. Depending on the installation location and the bike’s year/model, a load equalizer may be necessary (and is often recommended or included by Kuryakyn) to ensure the proper flash rate for the LED system.

The Kuryakyn LED Torpedo Turn Signal Indicator Lights are the ideal upgrade for riders prioritizing a sleek, custom aesthetic combined with the cutting-edge safety and brightness of high-intensity LED technology.
Kuryakyn LED Torpedo Turn Signal Indicator Lights

With their torpedo shape these LED lights are meant for rear use and feature three independent red and amber circuits that allow the units to serve as run-turn-brake lights.
Features:

Three independent red and amber circuits that allow to be run-turn-brake lights
Measures 70mm long x 45mm diameter (2-3/4″ x 1-3/4″)
Easy mounting with M10-1.5 x 25mm mounting stud (included)
ECE approved
Universal 12V application
Sold as a pair

Fitment Notes & Exceptions
This is a universal fit part; it may or may not fit without modification.