LA Choppers – AmericanV-twin.com https://www.american-twin.com Upgrade Your Ride Without Overpaying Thu, 27 Aug 2026 22:05:32 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.3 https://www.american-twin.com/wp-content/uploads/2025/11/cropped-gg-1-32x32.png LA Choppers – AmericanV-twin.com https://www.american-twin.com 32 32 LA Choppers Handlebar Wiring Harness Extension For Harley Touring 2014-2020 https://www.american-twin.com/product/la-choppers-handlebar-wiring-harness-extension-for-harley-touring-2014-2020/ Thu, 27 Aug 2026 22:05:29 +0000 https://www.american-twin.com/?post_type=product&p=22080 Extend your Harley Touring (2014–2020) handlebar wiring effortlessly with the LA Choppers CAN-Bus plug-and-play harness extension kit. Made in the USA for high-rise ape hangers.

]]>

LA Choppers Handlebar Wiring Harness Extension for Harley-Davidson Touring (2014–2020)

Upgrading to taller handlebars or aggressive ape hangers on your Harley-Davidson Touring motorcycle shouldn’t involve painful wire cutting, tedious soldering, or electrical headaches. The LA Choppers Handlebar Wiring Harness Extension Kit is the definitive plug-and-play solution designed specifically for 2014 through 2020 Harley Touring models equipped with CAN-Bus wiring technology.

Engineered to drop straight into your motorcycle’s factory electrical architecture, this harness extension kit allows you to raise your handlebars up to 20 inches while maintaining pristine OEM pin connectivity, total signal reliability, and factory-level electrical protection. Whether you are installing a sleek set of T-bars on a Street Glide, tall ape hangers on a Road King, or custom bars on a Road Glide, LA Choppers delivers the cleanest and most efficient wiring solution on the market.

Why You Need the LA Choppers CAN-Bus Harness Extension

When Harley-Davidson introduced the Rushmore platform in 2014, they overhauled the electrical architecture by implementing a digital Controller Area Network (CAN-Bus) system. CAN-Bus relies on micro-voltage data signals sent to control modules rather than heavy analog power flow. Splicing into these high-sensitivity lines by hand risks creating electrical resistance, throwing digital diagnostic trouble codes (DTCs), or damaging sensitive switch gear controls.

The LA Choppers Wiring Extension Kit solves this entire issue by providing factory-finished extension harnesses with pre-installed OEM-style connectors. There is zero wire stripping, zero soldering, and zero guessing required.

LA CHOPPERS WIRING EXTENSION SPECIFICATIONS
Compatibility 2014–2020 Harley-Davidson Touring Models (FLHX, FLTRX, FLHT, FLHR)
System Architecture CAN-Bus Digital Wiring System Compatible
Installation Type 100% Direct OEM Plug-and-Play
Max Handlebar Height Accommodates up to 20″ Handlebar Rises
Wire Quality OEM Color-Coded Wires with High-Temp Sheathing
Country of Manufacture Made in the USA

1. True Plug-and-Play Simplicity

Instead of spends hours in the garage pulling wires through tight internal bends or soldering extension leads, the LA Choppers harness plugs directly between your stock handlebar switch housing harnesses and the main chassis harness under the fairing or nacelle. The factory-molded male and female connectors lock securely into place with a satisfying click, locking out moisture and road debris.

2. Heavy-Duty USA-Made Construction

Every LA Choppers harness is manufactured right here in the United States using premium, automotive-grade wiring. The wires feature high-temperature insulation rated to handle heat generated inside tight handlebar tubes, inner fairings, and around hot air cooled V-Twin engines. Heat-shrink protective sleeves ensure the harness resists chaffing, vibration, and corrosion.

3. Original OEM Color Coding

Troubleshooting aftermarket wiring should never be a mystery. LA Choppers builds every extension using OEM-matching color-coded wires. This guarantees that your left-turn signals, cruise control switches, horn button, audio controls, and starter switches remain perfectly mapped without needing a wiring schematic overlay.

Engineered for All Handlebar Heights Up to 20 Inches

Whether you’re going for a subtle 10-inch rise or pulling out all the stops with massive 20-inch ape hangers, this extension kit provides the necessary wire slack without leaves excess bunched-up cable inside your motorcycle’s fairing or headlamp nacelle.

Fits Popular Handlebar Styles:

  • Ape Hangers: 12″, 14″, 16″, 18″, and 20″ heights.
  • Performance T-Bars & Kraus/Bagger Risers: Clean, minimalist routing for performance baggers.
  • Square-Corner Bars: High-angle bagger bars where internal wire pulls require extra cable slack.
  • Beach Bars & Wide Pullback Bars: Perfect when wide hand placements strain factory wiring looms.

Comprehensive Fitment Guide (2014–2020 Harley Touring)

The LA Choppers Handlebar Wiring Harness Extension is designed for precise fitment on 2014–2020 Harley-Davidson Touring models equipped with CAN-Bus wiring.

Guaranteed Fitment Applications:

  • Street Glide (FLHX / FLHXS): 2014, 2015, 2016, 2017, 2018, 2019, 2020
  • Road Glide (FLTRX / FLTRXS / FLTRU): 2015, 2016, 2017, 2018, 2019, 2020
  • Electra Glide / Ultra Classic (FLHT / FLHTCU / FLHTK): 2014, 2015, 2016, 2017, 2018, 2019, 2020
  • Road King (FLHR): 2014, 2015, 2016, 2017, 2018, 2019, 2020 (Note: Excludes Road King Special FLHRXS on specific harness SKUs—verify sub-model pinout prior to install).
  • CVO Touring Models: Fits 2014–2020 CVO Street Glide, Road Glide, and Limited models.

The Importance of Correct CAN-Bus Wiring

Modern Harley-Davidson motorcycles rely on electronic signals to govern critical safety and operational components. Installing low-quality, generic wire extensions or attempting to manually slice wires can introduce small amounts of electrical resistance. On a CAN-Bus machine, voltage drop can cause serious glitches:

Installation Method Risk Level System Stability Install Time
LA Choppers Plug-and-Play Harness Zero Risk 100% Factory Signal Integrity 15–30 Minutes
Manual Wire Cutting & Solder Splicing High Risk Causes Resistance, DTC Codes & Failure 2–4 Hours

Step-by-Step Installation Guide

Upgrading your handlebar wiring harness at home with LA Choppers is straightforward. Follow these steps for a clean, professional finish.

Required Tools:

  • Torx bit set (T25, T27, T30)
  • Socket set (3/8″, 7/16″, 1/2″)
  • Needle-nose pliers or pin extractor tool (if internal bar routing requires pin removal)
  • Dielectric grease

Installation Breakdown:

Step 1: Bike Preparation

  1. Turn off the main ignition switch and pull the main 50A system fuse to protect the electrical system.
  2. Cover your front fender and gas tank with protective fender blankets or heavy towels.
  3. Remove the outer Batwing fairing (Street Glide/Electra Glide) or Road Glide inner fairing speaker pods to gain access to the main wiring harness junction box.

Step 2: Disconnect Factory Harnesses

  1. Locate the factory left and right handlebar control harness plugs.
  2. Depress the safety locking tab and gently disconnect the factory switch housing connectors from the main wiring tree.

Step 3: Route & Connect the LA Choppers Extension

  1. If routing internally through new handlebars, pull the LA Choppers extension harness through the bar structure along with the switch wires.
  2. Apply a thin layer of dielectric grease to the pins of the extension connectors to prevent moisture buildup.
  3. Plug the male end of the LA Choppers harness into your OEM switch housing plug.
  4. Plug the female end of the LA Choppers harness directly into your Harley’s main chassis harness connector.

Step 4: Function Test & Final Assembly

  1. Reinsert the main system fuse.
  2. Turn on the ignition switch and perform a full electrical sweep: check left turn signal, right turn signal, high/low beam headlight, horn, brake lights, starter button, and thumb switches.
  3. Turn the handlebars lock-to-lock to ensure there is adequate slack and that wires are not pinched or stretched against the frame neck or riser clamps.
  4. Secure wires with cable zip ties and reinstall the outer fairing or nacelle.

Frequently Asked Questions (FAQs)

Q: Does this extension kit include Throttle-By-Wire (TBW) extensions?

A: Standard switch harness extension kits focus specifically on the hand control switch gear. Check your specific bundle SKU—if installing high handlebars on a 2014–2020 Touring model, you may also require a dedicated TBW sensor extension harness depending on whether your kit is sold as a standalone switch extension or a complete combo package.

Q: Will using this harness void my Harley-Davidson factory warranty?

A: No. Because the LA Choppers harness utilizes OEM-style direct-plug connectors, it does not alter, cut, or compromise the factory electrical system layout.

Q: Do I need to de-pin the connectors to run the wires internally?

A: Thanks to the streamlined design of LA Choppers harness connectors, most handlebars with generous internal routing space allow the plugs to pass straight through. For bars with tight sharp internal 90-degree corners, the pins can easily be extracted from the plastic housings, routed, and snapped back into place.

Q: Is this harness compatible with heated grips?

A: Yes, the main power and data feeds operate seamlessly alongside standard OEM or aftermarket heated grip setups.

Final Verdict: The Smartest Upgrade for Touring Handlebar Swaps

Installing custom handlebars on your 2014–2020 Harley-Davidson Touring bagger should improve comfort and style—not create electrical headaches. The LA Choppers Handlebar Wiring Harness Extension Kit eliminates the stress of extending hand control wires by offering a reliable, USA-made, plug-and-play solution.

Save hours on installation time, preserve your bike’s CAN-Bus digital health, and enjoy the ride with complete peace of mind. Order your LA Choppers Wiring Extension Kit today and complete your custom handlebar installation like a pro!

]]> LA Choppers 1 1/2″ Thresher Handlebar For Harley Road Glide 2015-2023 https://www.american-twin.com/product/la-choppers-1-1-2-thresher-handlebar-for-harley-road-glide-2015-2023/ Mon, 27 Apr 2026 11:12:25 +0000 https://www.american-twin.com/?post_type=product&p=21163 The LA Choppers 1 1/2" Thresher Handlebar is a professional-grade ergonomic upgrade designed to maximize rider control and structural mounting integrity for your Road Glide.

  • Massive 1.5-Inch Tubing: Features a high-output, ultra-rigid body construction, providing a professional mechanical barrier against handlebar flex and high-speed vibration.
  • Stepped 1.25-Inch Mounting: Specifically engineered with specialized stepped sections to ensure total mechanical synchronization with factory Road Glide 1.25" risers.
  • Precision Drilled & Dimpled: Designed for total mechanical synchronization with internal wiring layouts, providing a high-output foundation for a clean, streamlined cockpit.
  • High-Luster Chrome or Black Finish: Equipped with a precision-applied coating to provide a secure mechanical foundation and elite protection against environmental wear.

[The Professional Choice for Road Glide Performance, Delivering Unmatched Control Stability and LA Choppers Engineering Precision]

]]> LA Choppers 1 1/2″ Thresher Handlebar For Harley Road Glide 2015-2023

LA Choppers Thresher: Mastering the 2015-2023 Road Glide Ergonomic Standard

The LA Choppers 1 1/2″ Thresher Handlebar for Harley-Davidson Road Glide (2015-2023) represents the pinnacle of streamlined cockpit architecture for the serious performance enthusiast. For the rider of a Road Glide Special or a modern Road Glide ST who values the precision of a competition-grade “Thresher” signature as much as long-term structural durability, the challenge has always been finding a handlebar system that bridges the gap between raw, performance-oriented aesthetics and elite factory-integrated reliability. The LA Choppers system addresses these concerns by providing a rigid, precision-engineered foundation, designed to maximize rider leverage and center-of-gravity stability. This design provides secure, mechanical utility by utilizing a refined, heavy-gauge steel geometry, effectively providing a high-output structural delivery that prevents control vibration and optimizes balance during high-velocity urban runs and aggressive highway sprints. This provides the mechanical synchronization of rider positioning and elite motorcycle management needed to keep the rider confident, maximizing the efficiency of your performance run.

Material Innovation and Industrial Precision

What sets the LA Choppers assembly apart in the marketplace is the uncompromising focus on structural stability and material durability. In the high-performance Bagger scene, control integrity is paramount; however, this system features a robust, 1.5″ diameter DOM steel construction that ensures the bars remain synchronized perfectly without compromising the integrity of the critical riser mounting points over years of heavy-duty use. The high-quality finish is engineered for secure, long-lasting aesthetic appeal, providing a high-output, uniform surface that resists oxidation and harsh environment wear. Every unit is manufactured to exacting tolerances in the USA, featuring specialized knurling for secure, slip-free operation on all Road Glide models from 2015 through 2023. Whether you are navigating technical city streets or cruising through mountain passes, LA Choppers ensures your riding interface remains synchronized by professional-grade engineering integrity.

LA Choppers Thresher Handlebar Technical Specifications

  • Compatibility: Fits 2015-2023 Harley-Davidson Road Glide models (FLTRX, FLTRXS, FLTRU, FLTRK).
  • Diameter: Massive 1.5″ main body with 1.25″ stepped sections for total mechanical synchronization with factory risers.
  • Material: Heavy-duty DOM steel tubing for elite structural rigidity and a secure, rigid steering feel.
  • Wiring: Drilled and dimpled for total mechanical synchronization with internal or external wiring.
  • Throttle: Notched for Throttle-By-Wire (TBW) applications to ensure optimized structural reliability.
  • Knurling: 3.5″ on-center knurling for a secure, professional-grade bond with the Road Glide riser clamp.
  • Compatibility: Perfectly suited for performance builds demanding massive reliability and a bold Thresher signature.

Expert Fitment & Performance Advice

As specialists in motorcycle chassis ergonomics, we recommend the LA Choppers Thresher Bars for any build where “unmatched steering leverage” and “professional-grade custom capability” are the mission priorities. Pro Tip: To achieve your perfect setup, verify your cable and brake line length requirements—1.5″ bars provide a massive look but require the secure mechanical balance of correctly routed control lines. Installation Note: These bars are specifically calibrated for 1.25″ mounting requirements for total chassis synchronization of your high-output machine. Maintenance Note: Regularly check the riser clamp torque to maintain the high-output mechanical integrity of the handlebar assembly. Performance Note: Always verify that your switch housings and grips are seated to a secure, mechanical specification to ensure the system performs as designed during a high-speed touring scenario.

The Professional Standard for Premium Ergonomic Integrity

Choosing the LA Choppers 1 1/2″ Thresher Handlebar means investing in unmatched mechanical stability and a refined engineering signature. It offers a unique combination of modern material science and bold design that honors the performance legacy of the LA Choppers brand. For the rider who wants a high-output presence and a flawless engineering finish, LA Choppers is the unmatched leader. Secure the ride, master the road, and ride with confidence.

 

Product Style AmericanV-twin Item # Catalog Number Store Sku MFR. Product # Availability
12″ Rise / Chrome 39045 600-2324 LA-7317-12 In Stock: Ships within 24 hours
Black / 12″ Rise 39047 600-2325 LA-7317-12B In Stock: Ships within 24 hours
14″ Rise / Chrome 39044 600-2326 LA-7317-14 In Stock: Ships within 24 hours
Black / 14″ Rise 39046 600-2327 LA-7317-14B In Stock: Ships within 24 hours
16″ Rise / Chrome 39043 600-2328 LA-7317-16 In Stock: Ships within 24 hours
Black / 16″ Rise 39048 600-2329 30959 LA-7317-16B In Stock: Ships within 24 hours

This Product Fits

Harley Davidson
Road Glide FLTRX 2015-2023
Road Glide Limited FLTRK 2020, 2021, 2022, 2023, 2024
Road Glide Special FLTRXS 2015-2023
Road Glide ST FLTRXST 2022, 2023
Road Glide Ultra CVO/SE FLTRUSE 2015, 2016
Road Glide Ultra FLTRU 2016, 2017, 2018, 2019

]]> LA Choppers 1 1/4″ Ape Hanger Handlebar For Harley Touring 1996-2025 https://www.american-twin.com/product/la-choppers-1-1-4-ape-hanger-handlebar-for-harley-touring-1996-2025/ Mon, 27 Apr 2026 10:39:24 +0000 https://www.american-twin.com/?post_type=product&p=21121 The LA Choppers 1 1/4" Ape Hanger Handlebar is a professional-grade ergonomic upgrade designed to maximize rider control and structural mounting integrity for your Touring Harley.

  • 1.25-Inch Heavy-Wall Tubing: Features a high-output, rigid body construction, providing a professional mechanical barrier against handlebar flex and high-speed vibration.
  • Stepped 1-Inch Mounting: Specifically engineered with specialized stepped ends to ensure total mechanical synchronization with factory 1" risers and hand controls.
  • Precision Drilled & Dimpled: Designed for total mechanical synchronization with internal or external wiring layouts, providing a high-output foundation for a clean cockpit.
  • High-Luster Chrome or Black Finish: Equipped with a precision-applied coating to provide a secure mechanical foundation and elite protection against environmental wear.

[The Professional Choice for Touring Performance, Delivering Unmatched Control Stability and LA Choppers Engineering Precision]

]]> LA Choppers 1 1/4″ Ape Hanger Handlebar For Harley Touring 1996-2025

LA Choppers Ape Hangers: Mastering the 1996-2025 Touring Ergonomic Standard

The LA Choppers 1 1/4″ Ape Hanger Handlebar for Harley-Davidson Touring (1996-2025) represents the pinnacle of streamlined cockpit architecture for the serious performance enthusiast. For the rider of a classic Electra Glide or a modern Road Glide ST who values the precision of a competition-grade “Ape-Hanger” signature as much as long-term structural durability, the challenge has always been finding a handlebar system that bridges the gap between raw, performance-oriented aesthetics and elite factory-integrated reliability. The LA Choppers system addresses these concerns by providing a rigid, precision-engineered foundation, designed to maximize rider leverage and center-of-gravity stability. This design provides secure, mechanical utility by utilizing a refined, heavy-gauge steel geometry, effectively providing a high-output structural delivery that prevents control vibration and optimizes balance during high-velocity urban runs and aggressive highway sprints. This provides the mechanical synchronization of rider positioning and elite motorcycle management needed to keep the rider confident, maximizing the efficiency of your performance run.

Material Innovation and Industrial Precision

What sets the LA Choppers assembly apart in the marketplace is the uncompromising focus on structural stability and material durability. In the high-performance Touring scene, control integrity is paramount; however, this system features a robust, 1.25″ diameter DOM steel construction that ensures the bars remain synchronized perfectly without compromising the integrity of the critical riser mounting points over years of heavy-duty use. The high-quality finish is engineered for secure, long-lasting aesthetic appeal, providing a high-output, uniform surface that resists oxidation and harsh environment wear. Every unit is manufactured to exacting tolerances in the USA, featuring specialized knurling for secure, slip-free operation on all Touring models from 1996 through 2025. Whether you are navigating technical city streets or cruising through mountain passes, LA Choppers ensures your riding interface remains synchronized by professional-grade engineering integrity.

LA Choppers Ape Hanger Technical Specifications

  • Compatibility: Fits 1996-2025 Harley-Davidson Touring models (FLHT, FLTR, FLHX, FLHR).
  • Diameter: 1 1/4″ main body with 1″ stepped sections for total mechanical synchronization with controls.
  • Material: Heavy-duty DOM steel tubing for elite structural rigidity and a secure, rigid steering feel.
  • Wiring: Drilled and dimpled for total mechanical synchronization with internal or external wiring.
  • Throttle: Notched for Throttle-By-Wire (TBW) applications to ensure optimized structural reliability.
  • Knurling: 3.5″ on-center knurling for a secure, professional-grade bond with the riser clamps.
  • Compatibility: Perfectly suited for performance builds demanding massive reliability and a classic Ape signature.

Expert Fitment & Performance Advice

As specialists in motorcycle chassis ergonomics, we recommend the LA Choppers Ape Hangers for any build where “unmatched steering leverage” and “professional-grade custom capability” are the mission priorities. Pro Tip: To achieve your perfect setup, verify your cable and brake line length requirements—Ape Hangers generally require extended lines for the secure mechanical balance of your control interface. Installation Note: These bars are specifically calibrated for 1″ mounting requirements for total chassis synchronization of your high-output machine. Maintenance Note: Regularly check the riser clamp torque to maintain the high-output mechanical integrity of the handlebar assembly. Performance Note: Always verify that your switch housings and grips are seated to a secure, mechanical specification to ensure the system performs as designed during a high-speed touring scenario.

The Professional Standard for Premium Ergonomic Integrity

Choosing the LA Choppers 1 1/4″ Ape Hanger Handlebar means investing in unmatched mechanical stability and a refined engineering signature. It offers a unique combination of modern material science and bold design that honors the performance legacy of the LA Choppers brand. For the rider who wants a high-output presence and a flawless engineering finish, LA Choppers is the unmatched leader. Secure the ride, master the road, and ride with confidence.

 

Product Style AmericanV-twin Item # Catalog Number Store Sku MFR. Product # Availability
10″ / Chrome 54059 162-634 30991 LA-7321-10 In Stock: Ships within 24 hours
10″ / Black 54060 162-640 LA-7321-10B In Stock: Ships within 24 hours
Flat Black / 10″ 86082 600-1543 LA-7321-10M In Stock: Ships within 24 hours
12″ / Chrome 54061 162-635 21265 LA-7321-12 In Stock: Ships within 24 hours
Black / 12″ 54062 162-641 LA-7321-12B In Stock: Ships within 24 hours
Flat Black / 12″ 86083 600-1544 LA-7321-12M In Stock: Ships within 24 hours
14″ / Chrome 54063 162-636 321266 LA-7321-14 In Stock: Ships within 24 hours
Black / 14″ 54064 162-642 LA-7321-14B In Stock: Ships within 24 hours
Flat Black / 14″ 86084 600-1545 LA-7321-14M In Stock: Ships within 24 hours
16″ / Chrome 54065 162-637 30993 LA-7321-16 In Stock: Ships within 24 hours
Black / 16″ 54066 162-643 LA-7321-16B In Stock: Ships within 24 hours
Flat Black / 16″ 86085 600-1546 LA-7321-16M In Stock: Ships within 24 hours
18″ / Chrome 54067 162-638 LA-7321-18 Only 3 Left: Ships within 24 hours
Black / 18″ 54068 162-644 LA-7321-18B Only 4 Left: Ships within 24 hours
Flat Black / 18″ 86086 600-1547 LA-7321-18M In Stock: Ships within 24 hours
20″ / Chrome 54069 162-639 LA-7321-20 Only 5 Left: Ships within 24 hours
Black / 20″ 54070 162-645 LA-7321-20B In Stock: Ships within 24 hours
Flat Black / 20″ 86087 RZ-86087 LA-7321-20M In Stock: Ships within 24 hours

This Product Fits

Harley Davidson
Electra Glide Classic FLHTC/I 1996-2013
Electra Glide CVO/SE FLHTCSE 2004
Electra Glide CVO/SE FLHTCSE2 2005
Electra Glide Standard FLHT 2019, 2020, 2021, 2022
Electra Glide Standard FLHT/I 1996-2009
Electra Glide Ultra Classic FLHTCU/I 1996-2019
Electra Glide Ultra Classic Low FLHTCUL 2015, 2016
Electra Glide Ultra Limited CVO/SE FLHTKSE 2014-2021
Electra Glide Ultra Limited FLHTK 2010-2024
Electra Glide Ultra Limited Low FLHTKL 2015, 2016, 2017, 2018, 2019
Street Glide CVO/SE FLHXSE 2010-2022
Street Glide CVO/SE FLHXSE2 2011
Street Glide CVO/SE FLHXSE3 2012
Street Glide FLHX/I 2006-2023
Street Glide Special FLHXS 2014-2023
Street Glide ST FLHXST 2022, 2023
Street Glide Trike FLHXXX 2010, 2011
Tri Glide CVO/SE FLHTCUTGSE 2020, 2021, 2022
Tri Glide Ultra Classic FLHTCUTG 2009-2025
Ultra Classic Electra Glide CVO/SE FLHTCUSE 2006
Ultra Classic Electra Glide CVO/SE FLHTCUSE2 2007
Ultra Classic Electra Glide CVO/SE FLHTCUSE3 2008
Ultra Classic Electra Glide CVO/SE FLHTCUSE4 2009
Ultra Classic Electra Glide CVO/SE FLHTCUSE5 2010
Ultra Classic Electra Glide CVO/SE FLHTCUSE6 2011
Ultra Classic Electra Glide CVO/SE FLHTCUSE7 2012
Ultra Classic Electra Glide CVO/SE FLHTCUSE8 2013

]]> LA Choppers Pre-Wired Prime Ape 1″ Handlebars For Harley Touring 2014-2025 https://www.american-twin.com/product/la-choppers-pre-wired-prime-ape-1-handlebars-for-harley-touring-2014-2025/ Mon, 27 Apr 2026 07:35:20 +0000 https://www.american-twin.com/?post_type=product&p=21075 The LA Choppers Pre-Wired Prime Ape Handlebars are a professional-grade ergonomic upgrade designed to maximize rider control and structural mounting integrity for your Touring Harley.

  • Pre-Wired "Plug-and-Play" Harness: Features a high-output, pre-installed electrical system, providing a professional mechanical barrier against wiring errors and installation fatigue.
  • Signature "Prime" Mitered Corners: Specifically engineered with specialized aggressive bends to ensure total mechanical synchronization with the Batwing or Road Glide fairing.
  • 1-Inch Diameter Grip Section: Designed for total mechanical synchronization with factory controls, providing a high-output, rigid foundation for a secure chassis bond.
  • High-Luster Chrome or Black Finish: Equipped with a precision-applied coating to provide a secure mechanical foundation and elite protection against environmental wear.

[The Professional Choice for Touring Performance, Delivering Unmatched Control Stability and LA Choppers Engineering Precision]

]]> LA Choppers Pre-Wired Prime Ape 1″ Handlebars For Harley Touring 2014-2025

LA Choppers Prime Apes: Mastering the 2014-2025 Touring Ergonomic Standard

The LA Choppers Pre-Wired Prime Ape 1″ Handlebars for Harley-Davidson Touring (2014-2025) represent the pinnacle of streamlined cockpit architecture for the serious performance enthusiast. For the rider of a modern Street Glide or Road Glide who values the precision of a competition-grade “Prime-Ape” signature as much as long-term structural durability, the challenge has always been finding a handlebar system that bridges the gap between raw, performance-oriented aesthetics and elite factory-integrated reliability. The LA Choppers system addresses these concerns by providing a rigid, precision-engineered foundation, designed to maximize rider leverage and center-of-gravity stability. This design provides secure, mechanical utility by utilizing a refined, mitered geometry, effectively providing a high-output structural delivery that prevents control vibration and optimizes balance during high-velocity urban runs and aggressive highway sprints. This provides the mechanical synchronization of rider positioning and elite motorcycle management needed to keep the rider confident, maximizing the efficiency of your performance run.

Material Innovation and Industrial Precision

What sets the LA Choppers assembly apart in the marketplace is the uncompromising focus on structural stability and material durability. In the high-performance Touring scene, control integrity is paramount; however, this system features a robust, DOM steel construction that ensures the bars remain synchronized perfectly without compromising the integrity of the critical riser mounting points over years of heavy-duty use. The pre-wired internal harness is engineered for secure, long-lasting electrical appeal, providing a high-output, seamless connection that resists vibration and harsh environment wear. Every unit is manufactured to exacting tolerances, featuring specialized knurling for secure, slip-free operation on all Touring models from 2014 through 2025. Whether you are navigating technical city streets or cruising through mountain passes, LA Choppers ensures your riding interface remains synchronized by professional-grade engineering integrity.

LA Choppers Pre-Wired Prime Ape Technical Specifications

  • Compatibility: Fits 2014-2025 Harley-Davidson Touring models (Street Glide, Road Glide, Ultra).
  • Diameter: 1″ grip and riser section for total mechanical synchronization with factory components.
  • Wiring: Pre-installed “Plug-and-Play” harness for a secure, professional-grade electrical path.
  • Geometry: Aggressive mitered “Prime” corners for total mechanical synchronization with modern fairing lines.
  • Installation: Works with Throttle-By-Wire (TBW) systems for optimized structural reliability and safety.
  • Finish: Available in high-gloss black or triple-plate chrome for a secure, high-energy aesthetic bond.
  • Compatibility: Perfectly suited for performance builds demanding massive reliability and a classic Ape signature.

Expert Fitment & Performance Advice

As specialists in motorcycle chassis ergonomics, we recommend the LA Choppers Pre-Wired Bars for any build where “unmatched control leverage” and “professional-grade installation capability” are the mission priorities. Pro Tip: To achieve your perfect setup, verify your cable and brake line length requirements based on the bar height (e.g., 10″, 12″, or 14″); the secure mechanical balance of your control lines is vital for maintaining a confident, high-power output. Installation Note: This bar is specifically calibrated for 2014-2025 fly-by-wire requirements for total chassis synchronization of your high-output machine. Maintenance Note: Regularly check the riser bolt torque to maintain the high-output mechanical integrity of the handlebar assembly. Performance Note: Always verify that your switch housing screws are seated to a secure, mechanical specification to ensure the system performs as designed during a high-speed touring scenario.

The Professional Standard for Premium Ergonomic Integrity

Choosing the LA Choppers Pre-Wired Prime Ape 1″ Handlebars means investing in unmatched mechanical stability and a refined engineering signature. It offers a unique combination of modern material science and bold design that honors the performance legacy of the LA Choppers brand. For the rider who wants a high-output presence and a flawless engineering finish, LA Choppers is the unmatched leader. Secure the ride, master the road, and ride with confidence.

 

Product Style AmericanV-twin Item # Catalog Number Store Sku MFR. Product # Availability
Black 92689 92689 54217 LA-7352-13BW In Stock: Ships within 24 hours
Chrome 92688 92688 54216 LA-7352-13W In Stock: Ships within 24 hours

This Product Fits

Harley Davidson
Electra Glide Standard FLHT 2019, 2020, 2021, 2022
Electra Glide Ultra Classic FLHTCU/I 2014-2019
Electra Glide Ultra Classic Low FLHTCUL 2015, 2016
Electra Glide Ultra Limited CVO/SE FLHTKSE 2014-2021
Electra Glide Ultra Limited FLHTK 2014-2024
Electra Glide Ultra Limited Low FLHTKL 2015, 2016, 2017, 2018, 2019
Revival FLH 2021
Street Glide CVO/SE FLHXSE 2015-2022
Street Glide FLHX/I 2014-2023
Street Glide Special FLHXS 2014-2023
Street Glide ST FLHXST 2022, 2023
Tri Glide CVO/SE FLHTCUTGSE 2020, 2021, 2022
Tri Glide Ultra Classic FLHTCUTG 2014-2025

]]> LA Choppers Kage Fighter Straight 1 1/4″ T-Bars https://www.american-twin.com/product/la-choppers-kage-fighter-straight-1-1-4-t-bars/ Mon, 06 Apr 2026 21:54:37 +0000 https://www.american-twin.com/?post_type=product&p=20431 The LA Choppers Kage Fighter Straight 1 1/4" T-Bars are a professional-grade ergonomic upgrade designed to maximize steering leverage and structural control integrity for your performance Harley.

  • 1.25-Inch Industrial Steel: Features a high-output, reinforced construction, providing a professional mechanical barrier against handlebar flex and vibration.
  • Straight T-Bar Geometry: Specifically engineered with a specialized upright profile to ensure total mechanical synchronization with aggressive "Club Style" aesthetics.
  • Internal Wiring & TBW Ready: Designed for total mechanical synchronization with factory Fly-By-Wire and electrical looms, providing a high-output, clean-look foundation.
  • Precision CNC Mandrel Bent: Equipped with factory-verified 1.25" geometry that tapers to 1" at the controls for a secure mechanical foundation and slip-free cockpit.

[The Professional Choice for Performance Ergonomics, Delivering Unmatched Steering Stability and LA Choppers Engineering Precision]

]]> LA Choppers Kage Fighter Straight 1 1/4″ T-Bars

LA Choppers Kage Fighter: Mastering the Performance T-Bar Standard

The LA Choppers Kage Fighter Straight 1 1/4″ T-Bars represent the pinnacle of streamlined handlebar architecture for the serious performance enthusiast. For the rider of a Dyna, Low Rider S, or Performance Bagger who values the precision of a competition-grade “Kage Fighter” signature as much as long-term structural durability, the challenge has always been finding a steering system that bridges the gap between raw, performance-oriented leverage and elite aggressive aesthetics. The LA Choppers system addresses these concerns by providing a rigid, precision-engineered foundation, designed to maximize rider control and front-end feedback. This design provides secure, mechanical utility by utilizing a refined, straight-upright geometry, effectively providing a high-output ergonomic delivery that prevents riser deflection and optimizes posture during high-velocity urban runs and aggressive highway sprints. This provides the mechanical synchronization of rider positioning and elite motorcycle management needed to keep the rider confident, maximizing the efficiency of your performance run.

Material Innovation and Industrial Precision

What sets the LA Choppers Kage Fighter apart in the marketplace is the uncompromising focus on structural stability and metallurgical durability. In the high-performance club-style scene, handlebar integrity is paramount; however, this system features a robust, precision-welded steel assembly that ensures the controls remain synchronized perfectly without compromising the integrity of the critical triple-tree interface over years of heavy-duty use. The high-luster finish—available in show-chrome or satin black powder-coat—is engineered for secure, long-lasting aesthetic appeal, providing a high-output, uniform luster that resists oxidation and harsh environment wear. Every unit is manufactured to exacting tolerances in the USA, featuring pre-drilled ports for secure, vibration-free internal wiring on all compatible Harley-Davidson models. Whether you are navigating technical city streets or cruising through mountain passes, LA Choppers ensures your steering remains synchronized by professional-grade engineering integrity.

LA Choppers Kage Fighter T-Bar Technical Specifications

  • Compatibility: Fits Harley-Davidson models with standard 3.5″ on-center riser mounting.
  • Diameter: 1.25″ main body for total mechanical synchronization with oversized performance components.
  • Rise Options: Available in 8″, 10″, 12″, and 14″ for elite structural cockpit customization.
  • Width: 30.5″ tip-to-tip for optimized steering leverage and lane-filtering stability.
  • Pullback: 3.5″ Straight-series sweep for a secure, professional-grade ergonomic reach.
  • Material: Heavy-duty industrial steel for a secure, high-energy steering foundation.
  • Compatibility: Perfectly suited for performance builds demanding massive reliability and a bold “Kage” presence.

Expert Fitment & Performance Advice

As specialists in performance cockpit ergonomics, we recommend the LA Choppers Kage Fighter Bars for any build where “unmatched steering response” and “professional-grade durability” are the mission priorities. Pro Tip: To achieve your perfect setup, always upgrade to heavy-duty polyurethane riser bushings during installation; the secure mechanical balance of your mounting interface is vital for maintaining a confident, high-power output. Installation Note: These bars are specifically engineered for the 3.5″ on-center mounting requirement for total chassis synchronization of your high-output machine. Maintenance Note: Regularly inspect your mounting bolts and switch housing screws to maintain the high-output mechanical integrity. Performance Note: Always verify that your switch housings are torqued to a secure, mechanical specification to ensure the system performs as designed during a high-speed touring scenario.

The Professional Standard for Premium Steering Integrity

Choosing the LA Choppers Kage Fighter Straight 1 1/4″ T-Bars means investing in unmatched mechanical stability and a refined engineering signature. It offers a unique combination of modern metallurgical science and bold design that honors the performance legacy of the LA Choppers brand. For the rider who wants a high-output presence and a flawless engineering finish, LA Choppers is the unmatched leader. Secure the ride, master the road, and ride with confidence.

 

Product Style J&P Cycles Item # Catalog Number Store Sku MFR. Product # Availability
6″ Rise / Chrome 38982 590-1861 LA-7335-02 Only 3 Left: Ships within 24 hours
Flat Black / 6″ Rise 38983 590-1863 LA-7335-02M Only 4 Left: Ships within 24 hours
6″ Rise / Gloss Black 38996 590-1862 LA-7335-02B Only 4 Left: Ships within 24 hours
8″ Rise / Chrome 38981 590-1864 LA-7335-04 Only 2 Left: Ships next business day
Flat Black / 8″ Rise 38984 590-1866 LA-7335-04M Only 3 Left: Ships next business day
8″ Rise / Gloss Black 38995 590-1865 LA-7335-04B In Stock: Ships next business day
10″ Rise / Chrome 38979 590-1867 LA-7335-06 In Stock: Ships next business day
Flat Black / 10″ Rise 38986 590-1869 LA-7335-06M Only 4 Left: Ships within 24 hours
Gloss Black / 10″ Rise 38994 590-1868 LA-7335-06B In Stock: Ships next business day
12″ Rise / Chrome 38980 590-1870 LA-7335-08 Only 5 Left: Ships within 24 hours
Flat Black / 12″ Rise 38987 590-1872 LA-7335-08M In Stock: Ships next business day
Gloss Black / 12″ Rise 38993 590-1871 LA-7335-08B In Stock: Ships next business day
14″ Rise / Chrome 38978 540-2772 LA-7335-10 In Stock: Ships next business day
Flat Black / 14″ Rise 38985 590-1874 LA-7335-10M Only 4 Left: Ships within 24 hours
Gloss Black / 14″ Rise 38992 590-1873 LA-7335-10B In Stock: Ships next business day
]]> LA Choppers Rear Lowering Kit For Harley V-Rod 2004-2008 https://www.american-twin.com/product/la-choppers-rear-lowering-kit-for-harley-v-rod-2004-2008/ Tue, 09 Dec 2025 23:14:03 +0000 https://www.american-twin.com/?post_type=product&p=3789 LA Choppers Rear Lowering Kit For Harley V-Rod 2004-2008

Low-Profile Power: LA Choppers Rear Lowering Kit for Harley V-Rod (2004–2008)

The LA Choppers Rear Lowering Kit is a component specifically engineered to drop the ride height of the high-performance Harley-Davidson V-Rod models from the 2002 through 2008 model range (which includes your requested 2004–2008 years). This kit is popular for achieving a custom, lower stance that complements the V-Rod’s aggressive, drag-bike aesthetic.
Product Mechanism and Features

This kit utilizes precision-machined steel blocks to relocate the mounting point of the factory rear shocks, achieving the desired drop while using the stock shocks.

Drop Amount: The LA Choppers kit for the V-Rod is designed to lower the rear of the motorcycle by a fixed 1 inch. This provides a noticeable aesthetic change and improved footing without drastically sacrificing the minimal suspension travel the V-Rod already has.

Relocation Blocks: The kit consists of two high-strength steel lowering blocks/brackets that mount between the stock shocks and the swingarm.

Aesthetic Finishes: The kit is commonly available in a black powder-coated finish to blend seamlessly with the V-Rod’s aggressive styling.

Compatibility: The part number (e.g., LA-7590-05) generally fits many VRSC models from 2002 through 2008, including the V-Rod (VRSCA), Night Rod (VRSCD), and Street Rod (VRSCR).

Fitment Note

The wide fitment (2002–2008) ensures compatibility with the common rear shock configuration found on V-Rod models like:

V-Rod (VRSCA, VRSCB, VRSCAW)

Night Rod (VRSCD)

Street Rod (VRSCR)

Important Considerations

Ground Clearance: Lowering the V-Rod by 1 inch will reduce the already limited lean angle. You should be cautious of scraping the exhaust or footpegs during aggressive cornering.

Not for Shorty Shocks: The manufacturer warns that this kit is not to be used in conjunction with “shorty” or “low-profile” shocks, as doing so would cause tire-to-fender rub and severe handling issues.

Jiffy Stand: A 1-inch drop is usually manageable with the stock jiffy stand, but it is always recommended to check the bike’s lean angle after installation.

The LA Choppers Rear Lowering Kit is a straightforward, cost-effective way to achieve a V-Rod Slammed Look Kit without replacing the entire shock assembly.
Product Mechanism and Features

This kit utilizes precision-machined steel blocks to relocate the mounting point of the factory rear shocks, achieving the desired drop while using the stock shocks.

Drop Amount: The LA Choppers kit for the V-Rod is designed to lower the rear of the motorcycle by a fixed 1 inch. This provides a noticeable aesthetic change and improved footing without drastically sacrificing the minimal suspension travel the V-Rod already has.

Relocation Blocks: The kit consists of two high-strength steel lowering blocks/brackets that mount between the stock shocks and the swingarm.

Aesthetic Finishes: The kit is commonly available in a black powder-coated finish to blend seamlessly with the V-Rod’s aggressive styling.

Compatibility: The part number (e.g., LA-7590-05) generally fits many VRSC models from 2002 through 2008, including the V-Rod (VRSCA), Night Rod (VRSCD), and Street Rod (VRSCR).

Fitment Note

The wide fitment (2002–2008) ensures compatibility with the common rear shock configuration found on V-Rod models like:

V-Rod (VRSCA, VRSCB, VRSCAW)

Night Rod (VRSCD)

Street Rod (VRSCR)

Important Considerations

Ground Clearance: Lowering the V-Rod by 1 inch will reduce the already limited lean angle. You should be cautious of scraping the exhaust or footpegs during aggressive cornering.

Not for Shorty Shocks: The manufacturer warns that this kit is not to be used in conjunction with “shorty” or “low-profile” shocks, as doing so would cause tire-to-fender rub and severe handling issues.

Jiffy Stand: A 1-inch drop is usually manageable with the stock jiffy stand, but it is always recommended to check the bike’s lean angle after installation.

The LA Choppers Rear Lowering Kit is a straightforward, cost-effective way to achieve a V-Rod Slammed Look Kit without replacing the entire shock assembly.

Product Style AmericanV-twin Item # Catalog Number Store Sku MFR. Product # Availability
Black 888391 690-736 LA-7590-05 Only 5 Left: Ships within 24 hours


Fitment Notes & Exceptions

Lowering kits are not to be used in conjunction with “shorty” or “low-profile” shocks
Fits 2004-2008 V-Rod models with a 180 rear tire only

This Product Fits

Harley Davidson
Night Rod VRSCD 2006, 2007, 2008
Street Rod VRSCR 2006, 2007
V-Rod VRSCA 2004, 2005, 2006
V-Rod VRSCAW 2007, 2008
V-Rod VRSCB 2004, 2005

]]> LA Choppers Rear Lowering Kit For Harley Touring 2002-2016 https://www.american-twin.com/product/la-choppers-rear-lowering-kit-for-harley-touring-2002-2016/ Tue, 09 Dec 2025 22:59:08 +0000 https://www.american-twin.com/?post_type=product&p=3785 LA Choppers Rear Lowering Kit For Harley Touring 2002-2016

Tail Drop: LA Choppers Rear Lowering Kit for Harley Touring (2002–2016)

The LA Choppers Rear Lowering Kit is an upgrade designed to reduce the rear ride height of Harley-Davidson Touring models (FLH/FLT) manufactured from 2002 through 2016. This kit is highly popular for riders seeking a custom, lowered stance and improved footing while managing costs.

This wide fitment range covers the late Twin Cam Touring chassis, which primarily used 12-inch or 13-inch air-adjustable rear shocks.
Product Mechanism and Features

LA Choppers kits for the Touring platform in this era typically achieve the drop using a relocation method:

Lowering Blocks/Brackets: The kit usually consists of high-strength, precision-machined steel or aluminum lowering blocks or mounting brackets. These components are installed at the bottom of the stock rear shocks, effectively relocating the lower shock mounting point on the swingarm.

Adjustable Drop: The brackets often feature multiple mounting holes, allowing the rider to select a drop amount, commonly 1 inch or 2 inches.

Retains Stock Shocks: The key advantage is that the kit works with your existing stock air or coil-over rear shocks, retaining the factory ride feel (though the performance will be altered by the new geometry and reduced travel).

Fitment Range: Fits most Harley Touring models (Road King, Street Glide, Electra Glide, Road Glide, etc.) from 2002 through 2016.

Installation and Considerations

Simple Install: Installation is relatively straightforward, requiring the removal and reinstallation of the lower shock mounting bolts to integrate the new brackets.

Reduced Ground Clearance: Lowering the rear by 1 to 2 inches significantly reduces the motorcycle’s lean angle and ground clearance. Be extremely cautious of scraping floorboards, footpegs, or exhaust components during cornering.

Jiffy Stand: A significant drop may require a shorter kickstand (jiffy stand) to ensure the bike leans securely when parked.

Stiffer Ride: While the stock shocks are retained, the lowered geometry and reduced travel will generally result in a firmer or harsher ride over rough bumps compared to the stock height.

The LA Choppers Rear Lowering Kit Touring 2002-2016 is a popular and cost-effective way to achieve a custom, lowered profile for your Twin Cam Touring bike.

LA Choppers Rear Lowering Kit For Harley Touring
Features

Engineered to lower the rear of your motorcycle an ideal 1″
Makes the bike easier to hold up at low speeds or while stopped
Lowers the center of gravity, easing handling and improving control
Gives the bike a tough, custom stance
Un-complicated design makes installation easier
Precision machined for an excellent fit
All necessary hardware is and easy-to-follow instructions included
Caution: Riders must use extreme care when operating a modified motorcycle, particularly while familiarizing oneself with its altered handling characteristics
Works with stock air shocks only. Will not work with coil or aftermarket shocks

Made in the USA

Product Style AmericanV-twin Item # Catalog Number Store Sku MFR. Product # Availability
Black 954099 700-485 309952 LA-7590-00B In Stock: Ships within 24 hours
Chrome 954100 177-793 309955 LA-7590-00 In Stock: Ships within 24 hours


This Product Fits

Harley Davidson
Electra Glide Classic FLHTC/I 2002-2013
Electra Glide Standard FLHT/I 2002-2009
Electra Glide Ultra Classic FLHTCU/I 2002-2016
Electra Glide Ultra Limited FLHTK 2010-2016
Road Glide Custom FLTRX 2010, 2011, 2012, 2013
Road Glide FLTR/I 2002-2009
Road Glide Ultra FLTRU 2011, 2012, 2013
Road King FLHR/I 2002-2016

]]> LA Choppers Complete Plug And Play Cable/Brake Line Kit For Harley ABS Touring 2017-2020 https://www.american-twin.com/product/la-choppers-complete-plug-and-play-cable-brake-line-kit-for-harley-abs-touring-2017-2020/ Tue, 02 Dec 2025 16:55:34 +0000 https://www.american-twin.com/?post_type=product&p=2194 Item: P1007684 The LA Choppers Complete Plug and Play Cable/Brake Line Kit for Harley ABS Touring models (2017-2020) simplifies handlebar upgrades with an all-in-one solution. Key features include: • Plug and Play Design: Easy installation with pre-assembled cables and brake lines, minimizing setup time. • Tailored for ABS Models: Specifically designed to integrate seamlessly with ABS-equipped Touring motorcycles from 2017 to 2020. • Durable Construction: Made from high-quality materials for reliable performance and longevity. • Clean Aesthetic: Maintains a tidy appearance, enhancing the overall look of your bike. This kit is ideal for riders seeking a hassle-free way to upgrade their handlebars while ensuring optimal functionality and style. Great. ]]> LA Choppers Complete Plug And Play Cable/Brake Line Kit For Harley ABS Touring

This cable/brake kit is designed to provide you with everything you would need to swap to your new handlebars. The great bonus to LA Choppers cable kits is that they can also be used as replacement lines for your current cable and brake lines.
Features:

Take the headache out of having to “cable calculate” swapping handlebars
Kit includes the correct length braided cables, brake/clutch lines and wire extensions to complete a handlebar swap
Wire extensions plug directly into OEM plugs, no need to cut and solder any wires
Stainless Steel has braided stainless and clear coating with chrome fittings
Midnight Stainless Steel has a black smoke tinted coating and black fittings
Black Vinyl kits are wrapped in a solid black finish and has chrome fittings

 

Product Style AmericanV-twin

Item #

 Catalog Number Store Sku MFR. Product # Availability
Stainless / Mini Apes 10239205 510-2592 LA-8054KT3-08 In Stock: Ships within 24 hours
Mini Apes / Black 10239209 510-2593 LA-8054KT3-08B In Stock: Ships within 24 hours
Mini Apes / Midnight 10239213 510-2594 LA-8054KT3-08M In Stock: Ships within 24 hours
Stainless / 12″-14″ Apes 10239208 510-2595 318137 LA-8054KT3-13 In Stock: Ships within 24 hours
Black / 12″-14″ Apes 10239211 510-2596 LA-8054KT3-13B In Stock: Ships within 24 hours
Midnight / 12″-14″ Apes 10239216 510-2597 LA-8054KT3-13M In Stock: Ships within 24 hours
Stainless / 15″-17″ Apes 10239207 510-2598 318138 LA-8054KT3-16 In Stock: Ships within 24 hours
Black / 15″-17″ Apes 10239212 510-2599 LA-8054KT3-16B In Stock: Ships within 24 hours
Midnight / 15″-17″ Apes 10239215 510-2600 309910 LA-8054KT3-16M In Stock: Ships within 24 hours
Stainless / 18″-20″ Apes 10239206 510-2601 LA-8054KT3-19 In Stock: Ships within 24 hours
Black / 18″-20″ Apes 10239210 510-2602 LA-8054KT3-19B In Stock: Ships within 24 hours
Midnight / 18″-20″ Apes 10239214 510-2603 LA-8054KT3-19M In Stock: Ships within 24 hours

This Product Fits

Harley Davidson
Electra Glide Standard FLHT 2019, 2020
Electra Glide Ultra Classic FLHTCU/I 2017, 2018, 2019
Electra Glide Ultra Limited CVO/SE FLHTKSE 2017, 2018, 2019, 2020
Electra Glide Ultra Limited FLHTK 2017, 2018, 2019, 2020
Electra Glide Ultra Limited Low FLHTKL 2017, 2018, 2019
Road Glide CVO/SE FLTRXSE 2018, 2019, 2020
Road Glide FLTRX 2017, 2018, 2019, 2020
Road Glide Limited FLTRK 2020
Road Glide Special FLTRXS 2017, 2018, 2019, 2020
Road Glide Ultra FLTRU 2017, 2018, 2019
Road King FLHR/I 2017, 2018, 2019, 2020
Street Glide CVO/SE FLHXSE 2017, 2018, 2019, 2020
Street Glide FLHX/I 2017, 2018, 2019, 2020
Street Glide Special FLHXS 2017, 2018, 2019, 2020

]]> LA Choppers Handlebar Cable Brake Line And Wire Kit For Harley Softail w/ABS 2018-2025 https://www.american-twin.com/product/la-choppers-handlebar-cable-brake-line-and-wire-kit-for-harley-softail-w-abs-2018-2025/ Tue, 02 Dec 2025 16:30:56 +0000 https://www.american-twin.com/?post_type=product&p=2168 Item: P673823 The LA Choppers Handlebar Cable Brake Line and Wire Kit for Harley Softail models with ABS (2018-2025) is designed to facilitate smooth handlebar upgrades. Key features include: • Complete Kit: Contains all necessary cables, brake lines, and wiring specifically designed for Softail models equipped with ABS for 2018-2025. • High-Quality Materials: Constructed from durable components to ensure longevity and dependable performance. • Custom Fit: Tailored lengths to provide optimal fit and function with upgraded handlebars, addressing specific needs of the Softail lineup. • User-Friendly Installation: Simplifies the setup process, making it accessible for both DIY riders and professional mechanics. • Sleek Appearance: Helps maintain a clean, streamlined look for your motorcycle after installation. Great. This kit is ideal for riders looking to enhance their handlebars while ensuring compatibility and functionality. ]]> LA Choppers Handlebar Cable Brake Line And Wire Kit For Harley Softail w/ABS
Features:

LA Choppers Complete kits take “cable calculation” headaches out of swapping handlebars
Kits include the correct length braided cables, brake/clutch lines and wire extensions
This kit is designed to work with LA Choppers handlebars and may not fit with other manufacturers’ bars due to their different dimensions
Made in the USA

 

Product Style AmericanV-twin

Item #

 Catalog Number Store Sku MFR. Product # Availability
12″-14″ Apes Full Length / Stainless Steel 1593273 350-0461 LA-8152KT2-13 In Stock: Ships within 24 hours
Black Vinyl / 12″-14″ Apes Full Length 1593274 350-0462 LA-8152KT2-13B In Stock: Ships within 24 hours
12″-14″ Apes Full Length / Midnight Stainless 1593275 350-0463 309899 LA-8152KT2-13M In Stock: Ships within 24 hours
15″-17″ Apes Full Length / Stainless Steel 1593276 350-0464 LA-8152KT2-16 In Stock: Ships within 24 hours
Black Vinyl / 15″-17″ Apes Full Length 1593277 350-0465 340395 LA-8152KT2-16B In Stock: Ships within 24 hours
15″-17″ Apes Full Length / Midnight Stainless 1593278 350-0466 LA-8152KT2-16M In Stock: Ships within 24 hours
18″-20″ Apes Full Length / Stainless Steel 1593279 350-0467 LA-8152KT2-19 In Stock: Ships within 24 hours
Black Vinyl / 18″-20″ Apes Full Length 1593280 350-0468 LA-8152KT2-19B In Stock: Ships within 24 hours
18″-20″ Apes Full Length / Midnight Stainless 1593281 350-0469 LA-8152KT2-19M In Stock: Ships within 24 hours
12″-14″ Apes Upper Cable / Stainless Steel 10150435 10150435 LA-8155KT2-13 In Stock: Ships within 24 hours
Black Vinyl / 12″-14″ Apes Upper Cable 10150436 10150436 LA-8155KT2-13B In Stock: Ships within 24 hours
12″-14″ Apes Upper Cable / Midnight Stainless 10150437 10150437 LA-8155KT2-13M In Stock: Ships within 24 hours
15″-17″ Apes Upper Cable / Stainless Steel 10150438 10150438 LA-8155KT2-16 In Stock: Ships within 24 hours
Black Vinyl / 15″-17″ Apes Upper Cable 10150439 10150439 LA-8155KT2-16B In Stock: Ships within 24 hours
15″-17″ Apes Upper Cable / Midnight Stainless 10150440 10150440 LA-8155KT2-16M In Stock: Ships within 24 hours
Stainless Steel / 18″-20″ Apes Upper Cable 10150441 10150441 LA-8155KT2-19 In Stock: Ships within 24 hours
Black Vinyl / 18″-20″ Apes Upper Cable 10150442 10150442 LA-8155KT2-19B In Stock: Ships within 24 hours
Midnight Stainless / 18″-20″ Apes Upper Cable 10150443 10150443 LA-8155KT2-19M In Stock: Ships within 24 hours

This Product Fits

Harley Davidson
Softail Deluxe FLDE 2018, 2019, 2020
Softail Fat Boy 114 FLFBS 2018-2024
Softail Fat Boy FLFB 2018, 2019
Softail Heritage Classic 114 FLHCS 2018-2024
Softail Heritage Classic FLHC 2018, 2019, 2020, 2021
Softail Low Rider FXLR 2018, 2019, 2020
Softail Slim FLSL 2018, 2019, 2020, 2021
Softail Sport Glide FLSB 2018, 2019, 2020, 2021
Softail Standard FXST 2020, 2021, 2022, 2023, 2024
Softail Street Bob 114 FXBBS 2021, 2022, 2023, 2024
Softail Street Bob FXBB 2018, 2019, 2020

]]> LA Choppers Handlebar Cable Brake Line And Wire Kit For Harley Touring w/ABS 2021-2025 https://www.american-twin.com/product/la-choppers-handlebar-cable-brake-line-and-wire-kit-for-harley-touring-w-abs-2021-2025/ Tue, 02 Dec 2025 15:51:32 +0000 https://www.american-twin.com/?post_type=product&p=2149 Item: P958533 The LA Choppers Handlebar Cable Brake Line and Wire Kit for Harley Touring models with ABS (2021-2025) is designed for hassle-free handlebar upgrades. Key features include: • Complete Package: Includes all necessary cables, brake lines, and wiring tailored for 2021-2025 Touring bikes with ABS. • Durable Construction: Made from high-quality materials for long-lasting performance and reliability. • Customized Fit: Specifically designed to ensure optimal fit and function with upgraded handlebars. • Easy Installation: Engineered for straightforward mounting, suitable for both DIY enthusiasts and professionals. • Clean Aesthetic: Maintains a sleek and tidy look after installation, enhancing the overall appearance of your motorcycle. Great. This kit is an ideal choice for riders looking to upgrade their handlebars while ensuring proper fit and functionality. ]]> LA Choppers Handlebar Cable Brake Line And Wire Kit For Harley Touring w/ABS

No more string. No more calculations or headaches. No more hoping you ordered the right stuff or figuring out what end style goes on your controls or calipers. LA Choppers’ Handlebar Cable/Line Kits make swapping bars on your bike a simple job. Each kit includes the correct length clutch cable, brake line kit with fittings, banjo bolts and copper crush washers. Each cable is covered with a coating to help keep the cables from abrading or damaging surrounding parts.
Features:

LA Choppers Complete kits take “cable calculation” headaches out of swapping handlebars
Kits include the correct length braided cables, brake/clutch lines and wire extensions
This kit is designed to work with LA Choppers handlebars and may not fit with other manufacturers’ bars due to their different dimensions
Made in the USA

 

Product Style AmericanV-twin

Item #

 Catalog Number Store Sku MFR. Product # Availability
Stock / Stainless Steel 10148783 10148783 LA-8056KT2-08 In Stock: Ships within 24 hours
Stock / Black Vinyl 10148784 10148784 LA-8056KT2-08B In Stock: Ships within 24 hours
Stock / Midnight Stainless 10148785 10148785 LA-8056KT2-08M In Stock: Ships within 24 hours
12″-14″ Apes / Stainless Steel 10148786 10148786 LA-8056KT2-13 In Stock: Ships within 24 hours
Black Vinyl / 12″-14″ Apes 10148787 10148787 LA-8056KT2-13B In Stock: Ships within 24 hours
12″-14″ Apes / Midnight Stainless 10148788 10148788 LA-8056KT2-13M In Stock: Ships within 24 hours
15″-17″ Apes / Stainless Steel 10148789 10148789 LA-8056KT2-16 In Stock: Ships within 24 hours
Black Vinyl / 15″-17″ Apes 10148790 10148790 LA-8056KT2-16B In Stock: Ships within 24 hours
15″-17″ Apes / Midnight Stainless 10148791 10148791 LA-8056KT2-16M In Stock: Ships within 24 hours
Stainless Steel / 18″-20″ Apes 10148792 10148792 LA-8056KT2-19 In Stock: Ships within 24 hours
Black Vinyl / 18″-20″ Apes 10148793 10148793 LA-8056KT2-19B In Stock: Ships within 24 hours
Midnight Stainless / 18″-20″ Apes 10148794 10148794 LA-8056KT2-19M In Stock: Ships within 24 hours

This Product Fits

Harley Davidson
Electra Glide Highway King FLHFB 2023
Electra Glide Standard FLHT 2021, 2022
Electra Glide Ultra Limited CVO/SE FLHTKSE 2021
Electra Glide Ultra Limited FLHTK 2021, 2022, 2023, 2024
Revival FLH 2021
Road Glide Special FLTRXS 2023
Road King FLHR/I 2021, 2022
Road King Special FLHRXS 2021, 2022, 2023, 2024, 2025
Street Glide CVO/SE FLHXSE 2021, 2022
Street Glide FLHX/I 2021, 2022, 2023
Street Glide Special FLHXS 2021, 2022, 2023
Street Glide ST FLHXST 2022, 2023

]]>